Skip to main content
ASK OUR EXPERTS
1-866-464-6553

750 CFM Classic Holley Carburetor

Obsoleted and replaced by 0-3310S

Part # 0-3310SA Be the first to write a review

750 CFM Classic Holley Carburetor

Not Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Holley's new 0-3310SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley's aluminum 0-3310SA will hold its shine and also can be hand polished for a custom look! It's based on the 0-3310C - a hot rod staple for over four decades! Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and manual choke make it amazingly universal. The famed 0-3310 is one of ten inaugural inductees into the Hot Rod Magazine Speed Parts Hall of Fame! Its well-known performance calibration and 750 CFM airflow keep it on top still today. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's. This model is obsoleted and replaced by 0-80457S.

Features:

  • Vibratory polished aluminum for good looks, weight savings and long lasting shine
  • Performance upgrade for stock to mildly modified vehicles
  • Universal calibration for easy bolt-on performance
  • Manual choke (cable actuated - hand controlled) for precise cold start control
  • Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Power valve blow-out protection
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

About Holley

Looking for Holley performance products? We're the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, and more. Buy now!

Barrels4
Billet ColorNone
BoosterStraight
Brand Holley
Carburetor UseStreet
CFM750
ChokeManual
Circuit2
ConditionNew
Emission Code3
FinishShiny
FuelGasoline
Fuel InletDual
Marine UseNo
MaterialAluminum
Model4160
Primary Main Jet72
Primary Power Valve6.5
Primary Pump Nozzle Size31
Product TypeStreet Warrior and Classic Holley
SecondariesVacuum
Supercharged ApplicationNo
Throttle Bore1.688 inch
WarrantyLimited 90 Day
UPC090127682203
Part Number0-3310SA
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
This model of carburetor has a square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with a 5 3/16" x 5 5/8" bolt pattern. If you have a spread bore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Limited 90 Day: See Details
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.