Holley Header Carb SelectorView CartHolleyTVYouTubeTwitterFacebook
What item is right for you?
Ask our experts:

1-866-464-6553
 


Suggested Retail: $822.95
Your Price: $739.95
FREE Shipping on orders over $100*
Buy Now
PRODUCT SPECIFICATIONS
MEDIA INFORMATION


4150 Ultra HP Series – Aluminum

750CFM Shiny with Black Billet, Aluminum Ultra HP

PART #: 0-80803BK

UPC #: 090127597156

Emission Control Number 3


Holley HP™ Carburetors have been the standard in racing Carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in our all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for improved corrosion protection. They're also available in natural tumble–polished aluminum with your choice of Black™ or Red™ metering blocks and base plate. The Aluminum Ultra HP comes in 600, 650, 750, 850, and True 950–CFM.

*Requires 9.75–inch spread fuel line, options at the bottom of the page.

• 100% Holley – Made in the U.S.A.
• 97% aluminum construction
• 38% weight savings
• 20% more fuel bowl capacity
• 10 new fuel bowl features
• 10 new base plate features
• 6 new metering block features
• 5 new main–body features
• 1 new carburetor...Ultra HP
750CFM Shiny with Black Billet, Aluminum Ultra HP


Features
  • American Made - Materials and Assembly
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
6061T6 BILLET ALUMINUM METERING BLOCKS
  • Improved durability, true gasket sealing (sealing surface integrity), bright dipped anodized for good looks and corrosion protection
  • Fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors). Power valve channel restrictors now machined lower in metering block for improved fuel delivery to power valve circuit
  • Accelerator pump channel now internally drilled eliminating need for external plug
  • Excess material removed for improved fuel capacity
  • Integrated pry-point assists in disassembly from fuel bowl and mainbody preventing damage to gaskets and gasket surfaces
  • New snap in place bowl vent whistle makes removal and/or replacement easier
6061T6 BILLET ALUMINUM BASE PLATES
  • Improved durability, true gasket sealing, bright dipped anodized for good looks and corrosion protection
  • Elongated (dual pattern) mounting holes allow fitment on intakes with square flange (Holley 4150™ style) or large flange (Holley Dominator® style)
  • Dedicated race-only throttle lever with all unnecessary street attachment points & tangs removed
  • 950 CFM throttle shaft comes slabbed and undercut for improved airflow
  • Stainless steel adjustable secondary link. Provides choice of 1:1 or progressive secondary throttle actuation for ultimate control of secondary opening rate
  • Knurled (hand adjustable) primary and secondary curb idle screws allow for easy idle adjustment without the use of tools
  • Primary throttle shaft capped to prevent entry of debris & contaminates
  • Factory machined accessory mounting hole for easy addition of adjustable throttle stop
  • Throttle body and new secondary pump cam lever designed to provide positive throttle stop on secondary side. Delivers safe & reliable 90° opening and return of throttle plates while ensuring maximum airflow
  • Baseplate designed with a boss that can be consumer machined for vacuum source
ALL NEW FUEL BOWL DESIGN
  • Completely redesigned from the ground up for racing
  • 20% more fuel capacity vs. a traditional v-bowl eliminates fuel starvation and provides consistent air/fuel ratios
  • Internal baffling to help control fuel slosh and minimize float level fluctuations in hard launching or cornering situations
  • Fuel shelf below the needle and seat to greatly minimize fuel aeration and promote more consistent metering
  • Fuel trough designed into floor of bowl to route fuel flow directly to the jets and assist in keeping jets covered by fuel
  • Clear sight windows on both sides of bowls for easy and safe fuel level adjustments
  • (A) Built in drain plug in front center of bowl provides easy access to empty contents of bowl
  • (B) Contoured entry provides smooth fuel flow directly to needle & seat
  • -8AN (o-ringed) inlet threads offer a large variety of plumbing options (come standard with -8AN o-ring to -6AN male adapter and -8AN plug). Can be plumbed from either side
  • Material added in key areas (needle & seat area, fuel inlet, sight window area) for added strength in the demanding race environment
  • Note: New lengthened fuel line required due to increased length of bowls (see Holley p/n 34-42, 34-43, 34-44 or Earl’s p/n AT104195ERL, AT104295ERL & AT104286ERL)
UPDATED MAIN BODY DESIGN
  • Air bleeds moved outward to allow a smoother transition of airflow from the top of the carburetor into the venturii
  • Integrated idle bypass valve eliminates the need for holes in throttle plates and allows for proper adjustment of idle while maintaining correct throttle plate to transfer slot relationship. Helps maintain good idle control when using radical camshafts.
  • All unnecessary mounting bosses removed for a smoother, cleaner appearance
  • Contoured hex head squirter screws for streamlined airflow
  • Cast in Holley HP logo for easy identification by race sanctioning bodies
  • Available in 600, 650, 750, 850 and True 950 CFM
  • Available tumble polished with Red™ or Black™ billet.
  • Available in all new Hard Core Gray™ hard coat anodized with Black™ billet. First-ever hard coat anodizing on fuel bowls and mainbody - actually penetrates the aluminum for superior corrosion protection.
  • Adjustable Throttle Stop bracket and WOT Microswitch brackets available
ORIGINAL HP FEATURES
  • Power valve blowout protection
  • 4-corner idle
  • 30cc GLFT accelerator pumps
  • Screw-in air bleeds
  • Dominator style fuel bowls allow plumbing from either side
  • Symmetrical venturii bores
  • Spun in boosters
  • Notched floats and jet extensions
  • Stainless steel throttle plates


Technical Information

Shipping Dimensions
L 14.250 in. x W 12.380 in. x H 9.130 in.
Weight 9.200 lb.
*Free Shipping & Handling only offered to the continental US on orders over $100.
BottomCurve

BottomStroke
Holley | Hooker Headers | Earl's | Weiand | NOS | Flowtech
Copyright Holley Performance Products, Inc.
NASCAR© and NASCAR Performance© are registered trademarks of the National Association for Stock Car Auto Racing, Inc.
Web Index | Terms Of Use | Vendor | Corporate | Search