Hooker Header View CartHolleyTVYouTubeTwitterFacebook
What item is right for you?
Ask our experts:

1-866-464-6553
 


Suggested Retail: $189.95
Your Price: $170.95
FREE Shipping on orders over $100*
Buy Now


Customers Who Bought This Item Also Bought
11030HKR 3 Bolt Flange Reducer 11030HKR
3 Bolt Flange Reducer
Super Competition Reducer, 3 Bolt Flange, 3" OD Collector to 2 1/8" OD Tailpipe, One Pair 
Comp Headers

67-81 Camaro, 68-79 Nova, 70-87 Monte Carlo, 64-87 Chevelle/El Camino/Sprint/Cabellero, 71-94 Full Size, 73-87 Chevy Pickup 2WD, 78-87 Olds Cutlass/Buick Regal: 283-400

PART #: 2466HKR

UPC #: 700414057545

Emission Control Number 3


Hooker Competition Headers offer the best value in the high performance header market. Designed for the value–conscious buyer who is running either a “stock” or “mildly–modified” engine, Hooker Competition Headers offer premium features at a very competitive price. Made of durable 16 gauge mild steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back pressure and increase exhaust flow. A perfect sealing surface is assured with the 5/16” machined flanges, with welded O–ring seals. Experience has proven that this flange size is ideal to maintain header integrity and be pliable enough to seal each exhaust port. Tubing is mandrel–bent to maintain metal strength and provide consistent tube diameter at radii to maximize performance. Hooker Competition Headers have a standard finish that features a heat–cured, high–heat–resistant paint. Optionally, the famous Hooker Ceramic Thermal Barrier Coating is available.
Competition Header, Tube Size 1.625" O.D., Collector Size 3" O.D., Port Shape: Same As Port, Black Finish

Installation Notes
Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts.

This header will not fit with close ratio steering box or rack conversions.

WARNING! Breaking in an engine with ceramic-coated Headers WILL result in damage to the coating and will VOID all warranties. Ceramic-coated Headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker® recommends using cast iron exhaust manifolds or old Headers to break in new engines to avoid coating damage. Please call the Holley tech service at 1-866-464-6553 for additional information regarding ceramic-coated exhaust products.


Features
  • 1-5/8" Tuned-length primary tubes for street performance
  • Mandrel-bent tubing for smooth exhaust flow
  • Light weight & sturdy 16-gauge tubing
  • Long transition 3" collector for decreased back pressure
  • 5/16” machined flanges for a perfect seal
  • Industry’s best welds for durability
  • designed for easy, trouble-free fit
  • All necessary hardware included for a complete installation
  • Will not fit with angle plug heads
  • Maximum ground clearance designed for cars lowered up to 4"
  • Will not fit with close ratio steering boxes or rack systems
  • This header is coated with a high heat resistant black paint


Technical Information

Shipping Dimensions
L 29.000 in. x W 16.000 in. x H 11.500 in.
Weight 17.900 lb.
*Free Shipping & Handling only offered to the continental US on orders over $100.
BottomCurve

BottomStroke
Holley | Hooker Headers | Earl's | Weiand | NOS | Flowtech
Copyright Holley Performance Products, Inc.
NASCAR© and NASCAR Performance© are registered trademarks of the National Association for Stock Car Auto Racing, Inc.
Web Index | Terms Of Use | Vendor | Corporate | Search