Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker Competition Long Tube Headers - Ceramic Coated

1998-1999 Camaro/Firebird: LS1 Tube Size 1.75", Collector Size 3", Port Shape: Same as Port

Part # 2468-1HKR Be the first to write a review

Hooker Competition Long Tube Headers - Ceramic Coated

Not Available

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
Hooker Super Competition Headers - Big Tubes and Power Spear Collectorโ„ข. These headers are for high output, supercharged or big inch versions of the Gen III (LS-6/LS-7) engine. The big 1-3/4" tubes combined with Hooker's unique Power Spearยฎ create the ideal header for competition use. Hooker's Power Spear allows exhaust gases to maintain high velocity as they enter the collector. They also divert along a straighter path in the collector, directing them to merge without excessive back pressure-causing turbulence. These features help extend and broaden the engines torque curve. The thick 3/8" flanges will seal perfectly and indefinitely. They are designed for a precise, noninterfering fit and good ground clearance. Gaskets and hardware kit are included. These high performance headers are intended for the enthusiast who wants the best performing header out there. These headers maintain the high value standards Competition headers are known for with sturdy 16 gauge construction and our new 3/8" head flange for superior sealing. These headers are easy to install, offer good ground clearance and come complete with gaskets and hardware kit.

Features:

  • Big 1 3/4” (Super Competition) tuned length primary tubes
  • Super Competition version features a 3” slip fit Power Spear™ collector for efficient high RPM scavenging and reduced back pressure
  • Competition version features a 3” slip fit long transition 9” conventional collector for efficient scavenging and reduced back pressure
  • Made of sturdy 18 (Super Competition) gauge tube
  • Precision machined 3/8” head flange for perfect sealing
  • Tight tuck collector designs make it easier to lower vehicle 1”-3”
  • Industry’s best welds for appearance and long life Offered in high temp black, metallic ceramic coated or 304 stainless steel
  • Easy to install and comes complete with hardware and instructions
  • Works with power steering, power brakes and air conditioning

About Hooker

Hooker Headers & exhaust systems are engineered to increase horsepower and torque while improving throttle response. Shop the official site of Hooker at Holley.com.

Bolt SizeM8 x 1.25 x 25mm
Brand Hooker
CARB (California) CompliantNo
Emission Code4
EngineGM Gen III/IV (LS)
Header FinishSilver Ceramic
Header StyleLong Tube
Primary Tube Dia.1-3/4 inch
Product TypeHeaders
UPC090127632925
Part Number2468-1HKR
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Headers will fit their respective applications only if big block engine frame stands are used from the following applications; Camaro 70-72, Chevelle 68-72 and Nova 68-72. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.