Skip to main content

Hooker Super Competition Long Tube Headers - Ceramic Coated

Part # 2840-1HKR Be the first to write a review

Fits 1968-1974 Chevy/GMC 1/2, 3/4 & 1-Ton Trucks 1968-1974 Blazer/Yukon/Jimmy/Suburban/1-Ton Crew Cab: 265-400 Tube Size 1.75" x 28", Collector Size 3", Collector Length 10", Port Shape: Same As Port

Hooker Super Competition Long Tube Headers - Ceramic Coated

In Stock
Free Shipping - Lower 48 US States
$1,229.95
Add to Wishlist

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler & Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Features:

  • Tuned-length primary tubes for maximum exhaust scavenging and velocity
  • Mandrel-bent tubing for smooth exhaust flow
  • Light weight & sturdy 18 gauge tubing
  • Long transition collector for decreased back pressure
  • 5/16” machined flanges for a perfect seal
  • Industry’s best welds for durability
  • Designed for optimal performance
  • All necessary hardware included for a complete installation

About Hooker

Hooker Headers & exhaust systems are engineered to increase horsepower and torque while improving throttle response. Shop the official site of Hooker at Holley.com.

Air Injection TubesNo
Bolt Size3/8-16 x 3/4 IN
Bolts IncludedYes
Brand Hooker
California Proposition 65Yes
CARB (California) CompliantFor Pre-1975 Vehicles only
CategoryExhaust
Collector Attachment3-Bolt Flange
Collector Diameter3.00 IN
Collector Reducer IncludedNo
Collector Reducer Outlet DiameterN/A IN
ColorSilver
DesignLong Tube
Drive2WD
EGT PortNo
Emission Code4
EngineChevrolet Small Block Gen I
FinishCeramic Coated
Flange Thickness5/16 IN
Gasket Or Seal IncludedYes
Grade TypePerformance
Header SeriesSuper Competition
Header StyleLong Tube
MaterialMild Steel
Mounting Hardware IncludedYes
Oxygen Sensor PortNo
Part TypeExhaust Header
Port ShapeOval
Primary Tubing Diameter1 3/4 IN
1.75 IN
Product TypeHeaders
QuantitySold as a Pair
Sub CategoryExhaust Manifolds
Tube Wall Thickness18 GU
UPC700414050799
Part Number2840-1HKR
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Hooker recommends using cast iron exhaust manifolds or old headers during your engine break-in period to avoid damaging your coated damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Hooker Super Competition Long Tube Headers - Ceramic Coated
    Hooker Super Competition Long Tube Headers - Ceramic Coated
    $1,229.95