Earls Header View CartHolleyTVYouTubeTwitterFacebook
What item is right for you?
Ask our experts:

1-866-464-6553
 


MEDIA INFORMATION


Auto–Flex Hose

Bulk Hose - Size 28, ID 1.5, OD 1.84375

PART #: 300280ERL

UPC #: 021432480147

Emission Control Number 1


A stainless braided hose at a price competitive with the imports. Earl's AUTO–FLEX HTE stainless braid– protected synthetic rubber hose is manufactured to our specifications in the U.S.A. Earl's AUTO–FLEX HTE hose features a recommended temperature range and maximum operating pressure equal to our premium quality Perform–O–Flex hose...at a much better price. A partial coverage textile inner braid is imbedded in the HTE liner during manufacture. The hose is finished with a full coverage stainless steel braid which is bonded to the reinforced HTE liner. Continuous use temperature rating is – 40 to + 300 degrees F. Auto–Flex hose is intended for use with Swivel–Seal, Auto–Fit and Auto–Mate hose ends only. No other Earl's hose ends are intended for use with Auto–Flex hose. The use of other manufacturers hose ends is not recommended.
Tough Stainless Steel Wire Braid–Protected Synthetic Rubber Hose, Easy to Cut and Assemble. Accepts Swivel–Seal, Auto Fit & Auto–Mate Hose Ends.

Installation Notes
Fuel manufacturers may have added any number of new unpublished additives to their blends. It is therefore difficult to know how the tube compound used in the inner liner of our Auto-Flex or any other brand of elastomeric hose will react with a specific fuel. Because of the unknowns described above, we are unable to guarantee that the hose listed is the best possible product to use with any specific fuel. If in doubt use PTFE lined hose. Not to be used with brake fluid.

*No hose ends available for hose sizes 3, 5, 7, 9, 11, 14, 18, 28, & 32. These are to be used with Earl's ECON–O–FIT or hose clamps only.


Features
  • Stainless Braid
  • Protects Synthetic Rubber Hose
  • See Catalog Page Above For Operating Pressures
  • Remains Flexible at Temperatures Between -40°F and +300°F
  • Competitive Price
  • Meets USA Specifications
  • Textile Braid In Hose Liner
  • Clean and Fast Flowing



Shipping Dimensions
L 12.000 in. x W 1.844 in. x H 1.844 in.
BottomCurve

BottomStroke
Holley | Hooker Headers | Earl's | Weiand | NOS | Flowtech
Copyright Holley Performance Products, Inc.
NASCAR© and NASCAR Performance© are registered trademarks of the National Association for Stock Car Auto Racing, Inc.
Web Index | Terms Of Use | Vendor | Corporate | Search