Pro–Lite 350 Hose
10 ft. PC Hose - Size 12, ID .69, OD .94
PART #: 351012ERL
UPC #: 021432130561
Constructed in the USA, the Pro Lite 350™ hose has a tough, abrasion resistant Nylon sheathing, bonded to the textile inner braid embedded in the synthetic rubber liner. This gives the hose incredible flexibility while maintaining the ability to withstand high vacuum and hot oil temperatures.
Pro Lite 350 hose has been specifically designed to use EARL'S Swivel Seal, Auto–Fit and Auto Crimp Hose ends exclusively. The use of other manufacturers hose ends is not recommended and may compromise the pressure capabilities and durability of the hose. Insist on the brands you trust, EARL'S Pro Lite 350 hose and Swivel Seal, Auto–Fit or Auto Crimp hose ends.
Lightweight Tough Nylon Covered High Pressure Hose, Withstands 350 Max PSI, Easy to Cut and Assemble. Accepts Swivel–Seal, Auto–Crimp & Auto–Fit Hose Ends.
Fuel manufacturers may have added any number of new unpublished additives to their blends. It is therefore difficult to know how the tube compound used in the inner liner of our Pro-Lite 350 or any other brand of elastomeric hose will react with a specific fuel. Because of the unknowns described above, we are unable to guarantee that the hose listed is the best possible product to use with any specific fuel. If in doubt use PTFE lined hose. Pro-Lite 350 hose is not to be used with brake fluid.
- Highest Pressure Lightweight Rubber Lined Hose Available
- Half the Weight of Traditional Stainless Braid Hose
- Maximum pressure rating of 350 psi
- 1400 PSI Burst Pressure
- -40° F to +300° F Operating Temperature Range
- Holds 27 hg Vacuum
- Constructed In USA
- Abrasion Resistant Nylon Sheath
- Easy to Cut and Work With
- Synthetic Rubber Liner
- Incredible Flexibility
- Withstands Hot Oil Temperatures
L 14.000 in.
W 14.000 in.
H 3.000 in.