33 ft. PC Hose - Size 6, ID .34375 (Carbon lined)
PART #: 633006ERL
Speed–Flex hose is intended for use with Speed–Seal hose ends only. No other Earl's hose end is intended for use with Speed–Flex hose. The use of other manufacturers hose ends is not recommended. The use of stainless braid protected PTFE lined brake hose assemblies will result in a firmer brake pedal, improved brake pedal “feel” and better brake modulation.
Lightweight Tough Nylon Covered High Pressure Hose, Withstands 1500 Max PSI, Easy to Cut and Assemble. Accepts Speed–Seal Hose Ends Only.
Manufacturers have added any number of new unpublished additives to their blends rendering some of them incompatible with synthetic rubber lined hose. Earl's Speed-Flex PTFE lined stainless braided hose is impervious to any automotive fuel blend known to us and may be the best choice for use with modern racing gasolines. All SPEED-FLEX hoses are compatible with gasoline, hydrocarbon fuels, alcohols, nitro-methane, mineral and synthetic lubricants, and high density fuel additives. Size 6 is carbon lined to dissipate static electricity.
- Extruded PTFE
- Stainless Steel Outer Braid
- -65° to +450° F Operating Temperature
- Solves Pedal Travel Problem
- Carbon Lined for Static Dissipation
- Increased Brake Pedal Firmness
- Modulate Brakes Efficiently
- Improved Abrasion Resistance
- Increased Temp. Capacity
- Impervious To Any Fuel Blend
L 1.000 in.
W 15.000 in.
H 1.500 in.