i bought the bike in 2002 and over the last 6 years i changed just about everything on it, except the frame and forks. the paint was done by jim ogawa in fresno, ca. clinton custom cycle in lincoln, ca. assisted me in rebuilding the 113" S&S motor. i run the S&S 600 cam, 11:1 S&S pistons, and as for the bore and heads, well, lets just say we opended them up a bit, and the S&S super g shorty Carb feeds this monster. it has a set of martin brothers, medusa pipes and a d&m air cleaner at the other end. the wheels are a product of extreme machine. and i chose 12" chubby apes, with a single arlen ness mirror up top. i have p.m. brakes at both ends. i cut most of the foam out of the seat on this hard tail for the look, not the ride.