Skip to main content
ASK OUR EXPERTS
1-888-258-3835

MSD 6LS Ignition Controller for LS1/LS6 (24 tooth crank trigger) Engines

The 6LS and 6LS-2 Ignition Controllers can now be installed on EFI or carburetor equipped engines.

Part # 6010

MSD 6LS Ignition Controller for LS1/LS6 (24 tooth crank trigger) Engines

Not Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
While it may seem blasphemous to some, putting a carburetor on a GM Gen-III V-8 is a great option for those wanting the advantages of the aluminum small block without the headaches of wiring a modern EFI system. The controllers allow you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software. Other programmable features include a two-step rev limiter, a vacuum advance curve for cruising economy and even a step retard in case you want to add a little nitrous to the mix. The 6LS is designed for LS1/LS6 type engines with a 24-tooth wheel, which can be identified by its black crank sensor connector. The 6LS-2 is designed specifically for the LS2/LS7 and its 58-tooth wheel, which can be easily recognized by its gray crank sensor connector. Both of these compact ignition controllers fit with matching factory connectors for a direct installation. Only a handful of connections are required; the coils, crank sensor, MAP sensor and the cam sensor. You'll have your carb'ed LSX running in no time!

Features:

  • Runs a carbureted LS engine without complicated EFI hardware
  • Map a timing curve using Pro-Data+ software
  • Programmable two-step rev limiter, vacuum advance curve and step retard
  • Direct plug-in to factory components
  • Programmable via a PC through MSD's Pro-Data+ software
  • Does NOT control fuel

About MSD

Explore MSD's range of unrivaled ignition systems and components at Holley.com!

Brand MSD
Emission Code3
UPC032474601001
Part Number6010
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.