MENU
300-242_01.jpg
300-242_02.jpg
300-242_03.jpg
300-242_04.jpg
300-242_05.jpg
3002421.jpg
3002422.jpg
565111.jpg
Holley EFI Ford 351W Hi-Ram ManifoldYouTube Button

Holley 351W Ford Hi-Ram EFI Manifold

Ford 351W (9.5" Deck) Ford Hi-Ram Intake Manifold with 95mm LS Throttle Body Flange Top.

PART# 300-241

$855.95   Suggested Retail
$769.95   Your Price
Estimated shipping date: 02/09/2018
Free Shipping
Qty: 
Starting at $68 a month with Learn More
***Available separately, Holley has also designed a low profile 351W dual phase distributor for this combination. (Part Number 565-111). The new distributor allows for proper spark plug wire clearance under the intake and it can also be used with coil on plug applications. ***This manifold is designed to be used with aftermarket cylinder heads. OE design cylinder heads can also be used, but some modifications may be required. *** Manifold width is 11.32".

Overview

The EFI Hi-Ram manifold line has a new addition for the 351W Ford application. This manifold comes with a 95MM LS throttle body flange top, a 105mm LS throttle body top is also available. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sandrails, pulling trucks, track, street–rod applications and more! Manifold is designed for a 9.5" deck height. Manifold Width is 11.32". • Runner length and the tapered cross–section designed to perform well for a wide range of engine configurations • EFI fuel rails are machined for –8AN O–ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi–Ram kits. • Cast aluminum construction.

Features:

  • The 351W manifold is available to work with 95MM or 105MM GM LS throttle bodies
  • EFI fuel rails are machined for -8AN o-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Manifold is designed for a 9.5" deck height.

Specs

BrandHolley
ConstructionCast
Emission Code3
EngineFord 351W
FinishSatin
Flange StyleEFI
Fuel System TypeEFI
Manifold TypeHi-Ram
Port Size2.00" x 1.190"
Product TypeManifold
RPM Power Band1500-7000
Throttle Bore95mm
Part Number300-241

Tech Resources

***Available separately, Holley has also designed a low profile 351W dual phase distributor for this combination. (Part Number 565-111). The new distributor allows for proper spark plug wire clearance under the intake and it can also be used with coil on plug applications. ***This manifold is designed to be used with aftermarket cylinder heads. OE design cylinder heads can also be used, but some modifications may be required. *** Manifold width is 11.32".

Emissions

This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.

We Suggest

    *Free Shipping & Handling only offered to the contiguous US on orders over $100.

    Some parts are not legal for use in California or other states with similar regulations.