FOR IMMEDIATE RELEASE

AEM Releases CD-7 Plug & Play CAN Communications Harness for MSD Power Grid!

Hawthorne, CA—AEM has created a Plug & Play CAN bus Communication Harness (PN 30-2213) that eliminates the need to manually wire a CD-7 Digital Dash Display to the MSD Grid! This harness is fully terminated and connects the CAN2 input on the CD-7 main harness to the CAN output on the MSD Grid harness. Additional power cables are not necessary as the CAN connection from the MSD Grid will power the CD-7 Digital Dash Display.

CD-7 Plug & Play CAN Comms Harness (PN 30-2213) Features:

• Provides plug & play connection from MSD Power Grid to CD-7 Digital Dash Display – no additional wiring necessary!
• Connects to CAN2 connector on CD-7 main harness and CAN output on MSD Grid harness with terminated Y connector to power the dash through the AEMnet connector

CD-7 Digital Dash Features:

• Full color 7” screen with 800x480 resolution
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• IP66 water resistance allows for operation in boats and motorcycles without worry
• Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and 3rd party devices side by side
• Available with or without 200Mb internal logging (up to 1000Hz/channel)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
• Dedicated Alarm page quickly identifies problems (user defined)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use included page templates and input your channels and text, or create your own custom page templates
• Free DashDesign Graphics Editor software
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Two programmable LEDs above toggle buttons on sides of housing
• Available as package with VDM to add GPS for track mapping & lap times, accelerometer for longitudinal, lateral and vertical G-loads and gyrometer for roll, pitch and yaw
• Odometer function
• Over 200 supplied fully programmable warning icons, and you can add your own
• ‘Headlight-in’ connection dims the dash and LEDs during night operation
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Convert CAN bus channel values to user-defined text