MENU

CNC Operator - Blackheart

By: Human Resources | 09/08/2020 < Back to Motor Life Home
blog_holley_employment_opportunities.jpg

Holley Performance Products, a leader in automotive aftermarket products, has an opening for a CNC Operator – 1st and 2nd Shift.


Job Description:

Under no supervision Develop programs by interpreting measurement codes to bend exhaust pipes on the CNC Eaton Leonard – 3D FARO measurement Arm, Set up and operate CNC machines while maintaining quality and safety standards.


Requirements:

  • Plan bending operations by reviewing job orders, blue prints, and engineering plans - new product proofing, SST Tubing, fixture specifications, drawings, interpreting geometric dimensions and acceptable tolerances
  • Programming CNC Eaton Leonard by entering instructions based on geometry and trigonometry data, setting appropriately, the required tool on the Set up (to avoid clamp-tooling marks, wrinkles, humps). Provide part programs
  • Analyze drawings, blue prints, design data, 3D measurements in order to calculate correct bend dimensions for the CNC Eaton Leonard bender and tool selection
  • Operate the CNC Eaton Leonard bender
  • Maintain specifications by observing, Jigs fitting inspection, taking measurements, detecting malfunctions; troubleshooting bending programs, adjusting and reprogramming controls, sharpening and replacing worn tools; adhering to quality assurance procedures and processes
  • Use assembly and bending fixtures to check work and perform detailed inspection of pipes bent
  • Read 3D dimensions and to accurately measure dimensions on pipes being bent within specified tolerance
  • Control and maintain the minimum inventory levels required of bending tooling and SST Tubing all sizes
  • Maintain the established efficiency and productivity levels by management
  • Wear proper safety equipment and comply with Holley safety policies all time


Skills:

  • Good problem solving and conceptual skills
  • Excellent communication skills with other employees and engineers regarding any bending process issues
  • Must have a proficient understanding of programming codes
  • Experience setting up and troubleshooting CNC machines
  • Mathematics skills
  • Mechanical and technical capacity
  • Proven ability to successful multiple task in fast paced, high throughput environment
  • Make a positive contribution to maintaining a workplace that is healthy, organized and safe


Education/Experience:

  • High school diploma or GED, or equivalent years of experience
  • Three years’ experience as CNC Programmer programming with 2D/3D CAM/CAD software in a shop environment for multi-axis bending 2D & 3D projects
  • Experience in proofing new product
  • Ability to read and interpret blue prints
  • Working knowledge of using calipers and micrometers
  • Intermediate to advanced shop math
  • Proficient using a PC in a windows environment

 

Physical Demands:

  • Requires normal range of hearing and vision
  • Requires prolonged standing, some bending, and stretching, lifting up to 40 pounds
  • Requires eye-hand coordination
  • Works in high noise level environment


These positions are located at our Century St. location, Bowling Green, KY


2 open positions - 1st shift and 2nd shift


Submit resume to: resume@holley.com

 X  Holleydays 2020 Free Shipping
 X  Holleydays 2020 Free Shipping