Flowmaster FlowFX Direct-fit Muffler for 2019 RAM 1500 with 5.7L Engine
Hot New Flowmaster exhaust for all 2016-2019 Tacoma's with the 3.5L engine.| 08/02/2019
Our new FlowFX cat-back exhaust system for 2016-2019 Toyota Tacoma trucks with 3.5L engine is manufactured using durable 409 stainless steel throughout and features a 2.50-inch inlet pipe leading to a single inlet/dual outlet FlowFX "straight-through" muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent stainless steel tailpipes exit out each side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Notes: Fits both 2/4 Wheel Drive and all Wheelbases.
New Flowmaster Direct-fit Dual Mode Exhaust for 2019 RAM 1500| 08/01/2019
Introducing the new FlowFX Active dual-mode muffler for all 2019 RAM 1500 (new body) trucks with the 5.7L Hemi engine and factory dual exit exhaust. This direct-fit replacement muffler has split personalities with a nice performance tone over the stock exhaust system, thanks to the FlowFX performance muffler but also features a wireless controlled actuator valve on the Power Chamber redirecting exhaust through the turndown giving you that deep open exhaust sound with just a push of a button. System features include mandrel-bent stainless steel construction leading into the Power Chamber, followed by a round FlowFX performance muffler that easily connects to the factory tailpipe. The Power Chamber houses a wireless controlled valve with a large 3.00-inch turndown dump style tailpipe letting everyone know who the Boss is once activated. Other system features include actuator motor, control unit, two wireless key fobs, all necessary wiring, hardware, and detailed instructions. Note: Does not fit 2019 RAM Classic body or trucks with factory single exhaust.
Manufacturing Engineer| 02/28/2020
This position is responsible for planning and designing manufacturing processes to maximize efficiencies and eliminate waste, while maintaining and improving quality. Activities involved with this process include analyzing and improving the material flow, equipment layout, workflow, manufacturing methods and work force utilization.
Jeep Gladiator Axle-Back Single Exit Exhaust| 02/28/2020
Here's a sound clip showcasing the new axle-back exhaust system we're offering as a "muffler delete" with a single exit tailpipe.