Holley Factory EFI Training Schedule for 2023

10/27/2021
10 min read

Holley Factory EFI Training Schedule for 2023

10/27/2021
10 min read


Holley's popular factory training courses are back in 2023 with an updated curriculum to stay current with Holley EFI system updates. These factory direct training classes provide a unique opportunity to get advanced training and technical experience with Holley EFI directly from the people that developed the products you use. These two-day courses are presented in a comfortable environment surrounded by an American icon of performance at the National Corvette Museum near Holley's company headquarters in Bowling Green, Kentucky and provide technical training for dealers, racers, and any other user of their popular EFI systems.


Holley's EFI courses provide three levels of EFI training. The first class is Tier one. This class is two days. At the end of this class, participants will have the tools they need to successfully complete a conventional "canned" Holley EFI installation. Class space is currently limited to 15-20 people per session. The goal of the limited space is to allow the instructor the ability to work with each participant one-on-one as much as possible. This class is ideal for those who are new to EFI in general, as well as those who are new to Holley's EFI systems. This is a two-day class with a cost of $425.00 that will run from 8:00 a.m. to 5:00 p.m. The following topics will be covered in the class:



  • System features
  • Wiring
  • Instructions
  • Software loading and navigation
  • Using the data monitor
  • Basic Global File management
  • General engine and ignition parameters
  • Closed loop and learn
  • Timing tables
  • Idle parameters,
  • Pin mapping,
  • Basic Input/Output configuration
  • Tuning principles
  • Acceleration enrichment tuning
  • Drive by Wire Throttle body controls
  • GM / Ford transmission control
  • General data logging
  • And more




The tier two class will expand on what was learned in the Tier one class to include advanced tuning and set up principles. The tier two course also runs from 8:00 a.m. to 5:00 p.m., this two-day course has a cost of $425.00. Class size is again limited to 15-20 people per session. Prior completion of the Tier One class is required. The following topics will be covered in this course:


  • System features
  • Advanced Wiring
  • File management including, setting directory paths, creating a custom GCF and exporting GCF files to the ICF Library
  • Advanced engine parameters
  • Multiple Injector set strategies
  • Injector phasing
  • Custom ignition configurations
  • Cam/Crank sensor phasing
  • Advanced Closed loop and learn
  • Timing tuning tecniques and theory
  • Programmable timing retards
  • Knock Tuning
  • Idle parameters, including advanced idle troubleshooting and tuning
  • Tuning principles
  • Load scale, pro's and cons to Speed density, VE, alpha-N and Combo strategies
  • Acceleration enrichment tuning
  • Start-up fueling
  • After-start enrichment tuning
  • Cold start and cold idle tuning
  • Custom inputs/outputs
  • Rescaling fuel maps for boosted applications and increases resolution
  • Sensor scaling and warnings
  • Hot key navigation
  • And more




The tier three class will take all of the previously covered information and apply is to more complicated engine combinations that utilize turbochargers, nitrous oxide, active speed management , Advanced one and two axis control tables and water/methanol injection. Like the tier two course, this course is limited to 15-20 people per session, it runs from 8:00 a.m. to 5:00 p.m., and will be a two-day class with a cost of $425.00. Prior completion of the Tier two class is required. The following topics will be covered in this course:


  • Single and dual port Boost Control
  • Hands On PID Based controller Training
  • Boost based on Time,RPM,Gear, speed, Manual Boost and Advanced boost offset table strategies
  • Boost Safeties
  • Boost Builders
  • Progressive and Non Progressive wet and Dry Nitrous controls
  • Pedaling control strategies
  • Water / Methanol controls
  • Duty cycle based W/M tables
  • Fuel Flow based W/M control tables
  • Active speed management (time based traction control)
  • Advanced ICF 1 and 2 axis Tables
  • And more



The EFI combo class is a 4 day training class will combine the curriculum of the tier one and two classes into a streamlined learning experience that will remove the redundancies associated with taking both classes separately. This will allow for more in-depth discussions and examples that may have been time limited previously. This 4 day course will be held at the National Corvette Museum in Bowling Green Kentucky and will have a cost of $825.00 the course runs from 8:00 a.m. to 5:00 p.m., Class registration fees are non-Refundable. Class dates may be rescheduled at our discretion (subject to a rescheduling fee) no less than 30 days before your original scheduled class date. For more information Email [email protected]. The following topics will be covered in this course:


  • System Features
  • Proper Wiring Practices
  • Using Instructions and Help Files
  • Software Loading and Navigation
  • Using The Data Monitor
  • File Management
  • General and Advanced Engine and Ignition Parameters
  • Closed Loop and learn
  • Timing Tables and programmable retards
  • Idle Parameters
  • Basic Inputs and Outputs
  • Custom inputs and Outputs
  • Pin Mapping
  • Basic and Advanced tuning principles
  • Data Logging
  • Diagnostic System Logging
  • Acceleration Tuning
  • Cold Start Tuning
  • Drive By wire Control
  • Transmission Control
  • Global File comparison Tools
  • Cam and Crank Sensor Phasing
  • Plug and Play and Custom ignition configurations
  • Sensor Scaling and Calibration
  • Load Scaling: Pros and cons of Speed Density. Alpha-N , Combo modes and VE strategies
  • And More


The EFI comprehensive combo class ( AKA the GAUNTLET) will combine the curriculum of the tier one, two and three classes into a streamlined learning experience that will remove the redundancies associated with taking all three classes separately. This will allow for more in-depth discussions and examples that may have been time limited previously. This 6 day course will be held at the National Corvette Museum in Bowling Green Kentucky and will have a cost of $1,200.00 the course runs from 8:00 a.m. to 5:00 p.m., Class registration fees are non-Refundable. Class dates may be rescheduled at our discretion (subject to a rescheduling fee) no less than 30 days before your original scheduled class date. For more information Email [email protected]. The following topics will be covered in this course:


  • System Features
  • Using Instructions and Help Files
  • Software Loading and Navigation
  • Using The Data Monitor
  • File Management
  • General and Advanced Engine and Ignition Parameters
  • Closed Loop and learn
  • Timing Tables and programmable retards
  • Idle Parameters
  • Basic Inputs and Outputs
  • Custom inputs and Outputs
  • Advanced ICF 1 and 2 Axis Tables
  • Pin Mapping
  • Basic and Advanced tuning principles
  • Data Logging
  • Diagnostic System Logging
  • Acceleration Tuning
  • Cold Start Tuning
  • Drive By wire Control
  • Transmission Control
  • Global File comparison Tools
  • Cam and Crank Sensor Phasing
  • Plug and Play and Custom ignition configurations
  • Sensor Scaling and Calibration
  • Load Scaling: Pros and cons of Speed Density. Alpha-N , Combo modes and VE strategies
  • Single port Boost control methods
  • Dual port Boost control methods
  • Hands on PID controller training
  • Boost based on Time, RPM, Gear, Speed, Manual boost and advanced boost offset table strategies
  • Boost Safeties
  • Boost Builders
  • Nitrous controls Dry vs Wet systems
  • Progressive and non-progressive controls
  • Pedaling control strategies
  • Nitrous activation control strategies
  • Water-meth controls
  • Active speed Management



"Holley factory training is a fantastic way to get unique one-on-one time with our engineers and lead techs," says Bill Tichenor, Holley’s Director of Marketing. "The knowledge gained from these courses helps improve sales for our dealers and gives users specialized instruction to improve their general EFI understanding, as well as the tuning capabilities of Holley's EFI systems."



Classes fill up fast and registrations are limited. Book your class today.








Check Schedule and Availability Here



For additional information on the courses, E-mail: [email protected]

author

7 Posts