Holley Releases EFI Throttle Body Intake Elbows For LS and Ford 5.0L Engines
10/18/2017 < Back to Blog Home
Holley EFI Throttle Body Intake Elbows make it simple to adapt a single-bore throttle body to 4-barrel style intake manifolds. Fully compatible with both LS and Ford 5.0L throttle bodies, they feature four vacuum ports and slotted mounting holes that let you mount them forward, sideways, or rearward. These CNC-machined elbows have a 105mm throttle opening and a 100-degree mounting angle that creates extra hood clearance. Port-matched to a 4150 gasket to fit any intake manifold with a 4150 flange, they make it easy to bolt on a blower or turbo and feature two throttle-linkage mounting bosses and an LS3-style MAP sensor mounting port. (A billet cover is supplied for those who will not be utilizing a MAP sensor.)
See detailed product information for Holley EFI Throttle Body Intake Elbows.
Related Articles
Holley EFI Powered Ultra 4 Buggies Jump A Drift Train
| 11/15/2018Holley EFI Powered Ultra 4 Buggies jump over Nitto Tire drift cars
Read More
Holley Releases Single Plane Split-Design Race Intake Manifolds
| 10/22/2018They're made just for high-performance and race Gen III LS engines with cathedral port heads and 4150-style square-bore flanged carburetors or throttle bodies.
Read More
Current Articles
Life's Good: Bill Alvis' Wild Blown Nitrous S-10
| 01/15/2019He's had a lot of different engines in the truck, but never one like this.
Read More
Holley EFI 12.3" Pro Dash
| 01/15/2019Sema’s Best engineered product just got bigger and better! Holley’s large 12.3” Pro Dash allows you to monitor engine parameters at a glance and custom tune with your finger tips. There’s even a virtual switch panel to control your accessories. The Pro Dash is a must have for any Holley EFI system.
Read More
