New Hooker BlackHeart Exhaust Systems for 67-72 C10, Foxbody Mustang, and Jeep® TJ

10/30/2019
10 min read

New Hooker BlackHeart Exhaust Systems for 67-72 C10, Foxbody Mustang, and Jeep® TJ

10/30/2019
10 min read

At the heart of any performance vehicle is the exhaust system, which is why Hooker with its BlackHeart line of performance exhaust systems continues to push the boundaries of performance and engine swaps. Hooker BlackHeart continues to expand its line-up of swap system parts by adding exhaust options for Foxbody Coyote/LS/LT, 67-72 Chevy C10 Pickups as well as Jeep Wrangler® TJ LS/LT/Gen 3 Hemi swaps. Read on to learn more about these awesome new products!




Check out these 304 stainless steel LS/LT engine swap exhaust systems for the popular 1967 - 1972 Chevy/GMC C10 trucks. Featuring a through-crossmember design, 3 inch H-pipe crossover, it can be purchased with multiple exit locations to provide customers with a variety of options.
  • Compatible with rear mounted fuel tanks, wide rear wheels/tires and specific aftermarket rear panhard/track bars.
  • Fits with coil spring rear suspensions only (stock or aftermarket stock-type systems).
  • Integral part of Hooker Blackheart 1967-1972 Chevy/GMC C10 truck LS/LT engine swap systems.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • Manufacturer’s limited lifetime warranty.
  • Through-crossmember design provides maximum ground clearance for lowered trucks.



  • BlackHeart heard the JEEP® crowd needs engine swap products and they are listening, The system is designed to work with LS, LT or Gen 3 Hemi engine swaps. This is a 3" system designed to be compatible with any stock type rear suspension system, bigger wheels and tire assemblies and/or bolt-on lift kits.
  • Tight-Tucked Tip Exit Location Improves Functional Off-Road Clearance.
  • Designed For Use With Stock, Or Lifted OE Style Rear Suspension Systems.
  • Included Muffler Produces An Aggressive Sound Under Acceleration With A Quiet Note At Idle.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • 3” Diameter Tubing Provides Increased Exhaust Flow Capacity For V8 Engines
  • Manufacturer’s limited lifetime warranty.



  • Hooker Blackheart is excited to announce new products for 1979-1993 Mustangs, this 304 stainless steel exhaust system features an X-pipe designed crossover that offers bolt-in compatibility with their engine swap crossmembers, mounts and headers. This 3 inch rear exit header back system uses Factory mounting points for stock like fitment.
  • Connects directly to Hooker Blackheart LS or Coyote engine swap headers.
  • Designed for clearance with OE or aftermarket adjustable rear upper control arms.
  • Clears all transmissions listed for use with Hooker Blackheart 1979-1993 Mustang LS and Coyote engine swap systems.
  • Constructed from lightweight, 18-gauge, mandrel bent, type 304 stainless steel for maximized strength and durability.
  • Full 3” diameter system for maximum flow/horsepower potential.
  • Manufacturer’s limited lifetime warranty.



  • For more information on the products you see listed here, check out the Featured Recommendations below. To see Hooker BlackHeart's other offerings (including swap mounts, headers and more), check out the brand's product page HERE.

    author

    Staff Writer
    1716 Posts