NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds
Holley is pleased to announce the release of NOS Dry Nitrous Plates for Holley LS Hi-Ram EFI Intake Manifolds. The fastest, easiest way to upgrade to a dry-nitrous system, they bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds in an innovative one-piece configuration. Specially designed .103-inch passages machined into the billet 6061-T6 aluminum plate precisely spray through eight .040-inch openings into the center of each intake runner for optimum nitrous distribution and maximum power.
NOS Dry Nitrous Spacer Plates come complete with jetting for 50, 100, 150, 200, and 250 additional horsepower, but can easily handle up to 1000+ horsepower. They also put an end to broken, spun, and misaligned spray bars. Available in both black-anodized and clear designs, the kits include the plate itself, jet holders, a gasket designed specifically for these components, and all the hardware for a hassle-free installation.
NOS Releases Dry Nitrous Plates For Sniper EFI Fabricated LS Intakes| 02/28/2019
They "sandwich" between the top plate and bottom base plate and spray through eight .040-inch openings into the center of each intake runner for optimum distribution and max power.
Life's Good: Bill Alvis' Wild Blown Nitrous S-10| 01/15/2019
He's had a lot of different engines in the truck, but never one like this.
All about the B&M Pro Bandit line of Gated Race Shifters| 06/25/2019
In this video, Steve will walk you through your choices of our race-proven line of Pro Bandit gated race shifters.
"I Built It To Drive" - Dustin Meyer's 1952 Chevy Sedan| 06/25/2019
Check out our interview with Dustin Meyer at LS Fest West 2019