How to Adjust a Carburetor Automatic Choke| 03/16/2016
How to Adjust a Carburetor Automatic Choke
How to Change Carburetor Jets| 03/16/2016
How to change a Quick Fuel carburetor jet.
Quick Fuel Technology Power Valve Tech| 03/16/2016
Quick Fuel Technology Power Valve Tech
How to Adjust a Carburetor 4-Corner Idle System| 03/16/2016
How to Adjust a Carburetor 4-Corner Idle System
EFI Wiring Tips: Proper Ground And Voltage| 05/06/2014
When installing a Holley or any EFI system to your vehicle, it's imperative to have a proper ground and voltage for the system. The internals of an ECU contain delicate microprocessors and many other components that rely on clean, sound power and ground. Here are some tips from Holley's EFI program engineer Doug Flynn on how to get the proper ground and voltage connections for your EFI system.
Basic EFI Wiring Tips| 03/10/2014
The key to a successful EFI upgrade starts with making reliable wiring connections with the proper tools, techniques, and crimp terminals. Holley's EFI program engineer Doug Flynn, shares his tips on the basics of making proper wire connections.
Introduction to NOS| 02/10/2013
How nitrous oxide injection makes more horsepower.
Dry vs. Wet – Nitrous Oxide Installation| 02/10/2013
Is a dry NOS system better than a wet NOS system? Holley explains how each system works when injected into an engine to make more horsepower. The four main methods of introducing NOS to you engine are, a single dry fogger, a single wet fogger, direct port foggers, and wet plate systems.
Holley – EFI Tech: Proper Grounding| 01/09/2013
Ensuring you have a proper ground for your vehicle is important for many of your electronic components, and the Holley EFI system is no different. For more videos, go to http://www.HolleyEFI.com
Holley – EFI Tech: Avenger Initial Set-up| 01/09/2013
Setting up the Holley Avenger system is as easy as it gets. Take a look at how quick and simple it is. For more videos, go to http://www.HolleyEFI.com