Support Video Blog
NOS Dry Kit Installtion Tips: Attaching Fuel Pressure Regulator And Pressure Switch| 03/26/2012
NOS dry nitrous kits utilize the vehicle's existing fuel pressure to provide additional fuel. This video demonstrates how to properly connect the system to the factory fuel pressure regulator, and how to attach the fuel pressure switch. In some instances, you'll have to drill and tap the fuel rail to install the fuel pressure switch. This video demonstrates how this is easily accomplished.
How To Install Nitrous Kit Solenoids| 02/26/2012
NOS provides tips on how to properly plumb, locate and install the solenoids on NOS nitrous oxide wet, dry, plate, and direct port fogger systems. The tips include the proper sealing of AN and NPT fittings that are typically used on nitrous oxide delivery systems, as well as the best placement for the solenoids on the engine. The video also demonstrates how to properly measure an plumb hard lines to your NOS solenoids
How to Assemble Speed-Flex Hose| 03/08/2011
How to assemble Earl's PTFE lined braided stainless hose
Perform-O-Flex & Auto-Flex hose| 03/08/2011
How to assemble Earl's braided stainless hose
How to Assemble Super Stock Hose| 03/08/2011
How to assemble Earl's synthetic rubber hose
How to Assemble Pro-Lite 350 Hose| 02/08/2011
How to assemble Earl's durable nylon hose
Chevelles.com Features Videos of Holley's Avenger EFI Installation| 08/10/2010
Chevelles.com, the on-line forum for Chevelle owners and enthusiasts, recently posted a couple of videos on the installation and tuning proceedures for the Holley Avenger EFI system. Forum member Vince G. instaleld the Avenger EFI onto his 1969 SS, equipped with a 509 cubic inch big block. The first video shows how easily Vince set up the tune on the Avenger EFI, while the second video shows how smooth the idle is with the system installed. "One of the most noticeable things is how solid the idle is," says Vince in his post on Chevelles.com. "The idle used to dip a bit, depending on the temperature and if the headlights were on; and on occasion when braking downhill. The problem is no longer there," he says.
Accelerator Pump Cam Selection And Installation On Holley Carbs| 12/02/2009
Accelerator pump cams on Holley carbs can be swapped out to deliver advanced or delayed accelerator pump delivery depending on your engine's normal idle speed.