Free shipping on ALL orders!* - Details
MENU

Terminator X and X Max Features and Benefits

  • Plug and play GEN III HEMI engine control for 2003-2013+ such as the 5.7L, 6.1L and 6.4L engines
  • Plug and Play compatible with Holley EFI accessories – Analog gauges, shift lights, modules, and both 6.86” and 12.3” Pro Dash
  • Drive-by Wire Throttle Body Control (Terminator X Max Only)
  • Electronic Transmission Control (Terminator X Max Only)
  • EV1 or EV6 injector harness included (depending on your injector configuration)
  • High Impedance Injector drivers power Holley EFI and most stock injectors -Injector support chart found in instructions (will not support low impedance injectors)
  • Included Bosch LSU 4.9 wideband O2 sensors for accurate readings and precise tuning control
  • Built in 1bar MAP (manifold absolute pressure) sensor included - For Boosted applications – internal MAP sensor can be disabled and utilize external MAP sensor harness (kit includes a terminated connector for seamless installation)
  • Vacuum hose adapters included - (1/8”, ¼”, and 3/16” sizes)
  • 4 inputs – 12v, Ground, 5v, and frequency for items like pressure sensors, activation triggers, nitrous activation, or trans brake
  • Boost Control – boost vs. time, boost vs. gear, boost vs. RPM, boost vs. speed, and boost safeties
  • Nitrous Control – channels for wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR (Air/Fuel Ratio)
  • Advanced Tables – ( 4x 1D tables, 1x 1D gear table, 4x 2D table, and 1x 2D gear tables) for nearly unlimited table configuration options
  • On-board diagnostic LEDS - ECU power, engine run, TPS calibration, cam signal, and more! Identify critical engine parameters at a glance
  • 3.5” touchscreen handheld included - Internal data-logging, custom gauge display, and calibration wizard allow quick building bases tunes for any Domestic V8 engine
  • Compact ECU (Engine Control Unit) – At only 7.45” x 4.1” x 1.66” the compact packaging allows mounting virtually anywhere (XMAX ECU = 9.6” x 4.1” x 1.66”). REMINDER: diagnostic LED’s must face up!
  • FREE EFI Tuning software – For compete control of your Terminator X power plant

Diagnostic LED's

  • 8 Built-in multi-color diagnostic LED's allow you to quickly identify a variety of potential system issues, such as a failed TPS Autoset - faulty crank or cam sensors, or potential oxygen sensor issues!
  • 1. ECU Power - Green = ON
  • 2. Engine Running - Green = Running - Yellow = No RPM
  • 3. Wideband Status - Blue = Too Hot, Too Cold, Slow Warmup, or Uncalibrated, Green = OK!, Red = Sensor Failure, Yellow = Sensor Heating, Off = Sensor Disabled.
  • 4. TPS Calibration - Green - Calibrated, Red = Calibration Error, Cyan = DBW Pedal Calibration Error, Purple = DBW TB Calibration Error.
  • 5. Undefined - Future Use!
  • 6. Crank Signal - Green = Tooth Detected, below crank to run RPM (400RPM), Blue = Gap Detected, below crank to run RPM (400RPM), Red = Crank Error Detected, Off - Synced Properly.
  • 7. Cam Signal - Green = Tooth Detected, below crank to run RPM (400RPM), Blue = Gap Detected, below crank to run RPM (400RPM), Red = Cam Error Detected, Off - Synced Properly.
  • 8. Undefined - Future Use!

Troubleshooting at a Glance!

Terminator X ECU Connections

  • J1A - Main Harness Connector - This connector is primarily an “Input” connector. It contains all the sensor inputs and wide band oxygen sensor control.
  • J1B - Main Harness Connector - The second connector is the “J1B” connector (26 pin). This connector is the “output” connector. It has 8 injector outputs and outputs for other devices.
  • MAP Sensor - used on N/A applications, connect directly to left manifold vacuum port on the intake manifold.
  • Main Power - Connects to the Main Power Harness, these two wires MUST be wired directly to the Battery Terminals.

Handheld Boost Control!

  • The Terminator X system integrates boost control functionality into the handheld, allowing you to easily change timing and AFR offset without needing a Laptop!
  • For the advanced user, the Terminator X Software contains a robust boost control system, with Dome Control, Boost By Time/Gear/RPM/Speed, and built in Boost Safeties.

Boost Control at your Fingers Tips

Bottle Fed Power Management!

  • If nitrous oxide is your power adder of choice, the Terminator X system put nitrous control in your hands!
  • Through the handheld you have the power to set Min/Max RPM for Nitrous Activation, retard or advance timing, set Target AFR, and even build custom progressive curves for both Nitrous Percentage, and Ignition Timing.

Nitrous Control made easy!

Narrow Results
Brand
  • Holley EFI
  • Holley
Injector Connector
  • Jetronic / Minitimer (Bosch)
  • USCAR (EV6)
Product Type
  • EFI Software
  • Harness
  • Terminator X GEN III HEMI Kit
  • Transmission Harness
  • USB Data - Communication Cable
Items 1 - 15 of 15
   per page
Page:
  1. 1
    Items 1 - 15 of 15
       per page
    Page:
    1. 1

    Hardware HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    Connectors 2 2 6 4 -
    Injector Drivers 8 8 12 8 8
    Low Impedance Injector Drivers YES NO YES NO NO
    Communication via USB Port YES NO YES NO NO
    Communication via CAN adapter NO YES NO YES YES
    Diagnostic LEDs NO YES NO YES NO
    Knock Sensors 2 2 2 2 -
    Enclosure Aluminum Composite Aluminum Composite -
    Potted YES NO YES NO YES
    Data Logging HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    Internal & External External Only Internal & External External Only External Only
    MAP Sensor HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    External Only Internal 1 BAR, or External External Only Internal 1 BAR, or External Internal 2.5 BAR
    Wideband Sensors HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    1 1 2 1 1
    Bosch 4.2 YES NO YES NO NO
    NTK YES NO YES NO NO
    Bosch 4.9 NO YES NO YES YES
    Total Inputs (+12v, Gnd, 5v, Freq) HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    4 4 50 4 Varies
    +12v Yes Yes Yes Yes No
    Ground Yes Yes Yes Yes 2
    +5v Sensor Yes Yes Yes Yes 3* - SS Only
    Frequency Yes Yes Yes Yes NO
    Thermistor Yes NO Yes NO NO
    +20v Yes NO Yes NO NO
    Digital Speed NO NO Yes NO NO
    Customizable Software Inputs 80 20 80 20 NO
    A/C Shutdown Yes Yes Yes Yes NO
    Total Outputs (Gnd, PWM-) HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    4 4 36 4 Varies
    +12v Yes NO Yes NO No
    PWM+ Yes NO Yes NO No
    Ground Yes Yes Yes Yes YES
    PWM- Yes Yes Yes Yes YES
    Customizable Software Outputs 62 20 62 20 NO
    Dual Fans Yes Yes Yes Yes YES
    Secondary Fuel Pump Yes Yes Yes Yes YES
    IAC Kick Yes Yes Yes Yes YES
    Non-Electronic Trans TCC Control Yes Yes Yes Yes NO
    Load Sensing HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    VE YES YES YES YES YES
    Speed Density YES YES YES YES YES
    Alpha-N YES YES YES YES NO
    Combo YES YES YES YES NO
    Boost Control HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    MAP and Dome Control YES NO YES NO NO
    Dome Control YES YES YES YES YES
    Boost vs Time YES YES YES YES YES
    Boost vs RPM YES YES YES YES YES
    Boost vs Speed YES YES YES YES NO
    Boost vs Gear YES YES YES YES NO
    Boost Builder YES NO YES NO NO
    Boost Safeties YES YES YES YES YES
    Nitrous Stages HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    Wet Non-Progressive 8 1 8 1 1
    Wet Progressive 8 1 8 1 1
    Dry Non Progressive 8 1 8 1 1
    Dry Progressive 8 1 8 1 1
    GPOs 8 1 8 1 NO
    Rich/Lean Safeties YES YES YES YES YES
    Closed Loop to New Target YES YES YES YES YES
    Advanced Input Strategies YES NO YES NO NO
    Advanced Tables HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    1D 8 4 8 4 4
    1D Per Gear 8 1 8 1 NO
    2D 8 4 8 4 2
    2D Per Gear 8 1 8 1 NO
    Traction Control HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    YES NO YES NO NO
    Water/Meth HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    YES NO YES NO NO
    Staging Assist HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    YES YES YES YES NO
    Drive By Wire HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    Single Throttle Body NO NO YES YES NO
    Dual Throttle Body NO NO YES NO NO
    Transmission Control HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    GM 4L60/4L70/4L80 NO NO YES YES NO
    Ford AODE/4R70W NO YES YES YES NO
    Accessories HP TERMINATOR X DOMINATOR TERMINATOR X MAX SNIPER TBI
    7" Digital Dash YES YES YES YES YES
    Pro-Dash YES YES YES YES YES
    CAN Modules (VVT, etc) YES YES YES YES NO
    Analog Gauges YES YES YES YES YES

    Back To Top
     X  Holleydays 2020 Free Shipping
     X  Holleydays 2020 Free Shipping