Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Terminator X Software - Terminator X and X Max ECUs

Terminator X V3 Software is here! Click "Terminator X Revision Log" under the "Tech Resources" tab below for a full feature list.

Part # TERMINATORXSOFTWARE
3 Reviews

Terminator X Software - Terminator X and X Max ECUs

Free Download
Terminator X Software
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
Unlock the full potential of your Terminator X and Terminator X Max ECU with our free PC software download. Take control of your Fuel Tables, Timing Tables, Idle Control, DBW Control, Boost and Nitrous Control, and much more. Through the advanced tables, you also can add custom sensors such as flex fuel or nitrous bottle pressure. Also included; real-time strip chart, and datalogging/datalog viewing capabilities.

Features:

  • Hardware Support:
  • 6L80/90E Transmission Control (PN 558-499)
  • 7.3 Godzilla Crank Sensor Module (PN 558-474)
  • LT4 New Main Engine Harness (PN 558-130)
  • T56 and TKX/TKO Manual Transmission (558-480 / 558-481 / 558-482)
  • Software Updates:
  • Pin Map Test Mode - Allows people to toggle any output on/off to test wiring or the electrical device
  • Traction Control ICF - Includes all of the HEFI features and new mode - Allows for any/all types of TC to be used together
  • Boost Control Updates - Max boost VS Dome pressure mode - New mode that allows for a max boost threshold to be set vs the commanded dome pressure
  • Datalogger Updates - Toggle all channels on/off on graph - Line colors are now remembered per channel - Lambda and Target Lambda channels are now available

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Brand Holley EFI
Emission Code5
Product TypeEFI Software
Part NumberTERMINATORXSOFTWARE
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Terminator X Software
Version 3 Build 100
Terminator X Quickstart
Terminator X Quickstart
Terminator X Reference Manual
Terminator X Reference Manual
Terminator X SD Card Contents
Terminator X SD Card Contents
Terminator X 7" Digital Dash Firmware
For V2 Build 50 (V3 Build 100 coming soon)
Terminator X Revision Log
Terminator X Revision Log for V3 Build 100
Real-time Tuning - CAN to USB cable is required - Part number 558-443. Alternatively, you can save calibration changes to the SD card provided in the handheld, then upload them from the Handheld to the ECU.

Have a question about this product?

  • Question

    Do you offer a Apple IOS software application for the Terminator X product?

    By Charles P. on April 15, 2020

    Answer
    Charles, All of our tuning software suites are designed for Windows Operating Systems. We do not have Apple iOS or Mobille Phone support. Best Regards.
    Helpful?
  • Question

    I am considering the Terminator x controller for an LQ4 6.0L swap into my 68 cutlass. The motor came from a 2002 Chevy Silverado with mechanical TB. Will your controller allow me to upgrade to a newer drive by wire TB? And how can I get cruise control for this setup?

    By Randy G. on June 20, 2020

    Answer
    Hello Randy, Drive-By-Wire and Transmission Control are both supported by the Terminator X Max ECU. The Terminator X does not support those features. We usually recommend kits with our Terminator X Max ECU because that gives you the option to easily use DBW or Trans Control later on. Cruise control is not a supported feature at this time.
    Helpful?
  • Question

    I am considering the Terminator x controller for my LQ4 6.0 swap into 68 Cutlass. I am going to use a 4L80E transmission. Will it control the transmission? If not, can you recommend a solution?

    By Randy G. on June 20, 2020

    Answer
    Hello Randy, Our Terminator X Max ECUs will control 4L80E, 4L60E, 46RE and 4R70W transmissions.
    Helpful?
Load More
Reviews
3

5 out of 5 stars

  • 5 star

    100%

  • 4 star

    0%

  • 3 star

    0%

  • 2 star

    0%

  • 1 star

    0%

Your Review

Items 1 - 3 of 3
  per page
Page:
  1. 1
Items 1 - 3 of 3
  per page
Page:
  1. 1

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.