MENU
241-265_1.jpg
241-265_2.jpg
241-265_3.jpg

Holley LS Valley Cover - Trussed

GM LS2/LS3/LS7/LSX Trussed Valley Cover, Black Anodized Finish

Finish
Application
Oil Fill Cap Included

PART# 241-265

Be the first to write a review
$137.95   Suggested Retail
$123.95   Your Price
Free Shipping
In Stock  
Qty: 
Add to Wish List

If it is your intent to use the top mounted factory oil pressure sensor on LS2/LS3/LS7/LSX engines, you will need to carefully drill and tap the oil pressure sensor provision using the pre-located pilot hole on the bottom of the valley cover. The hole should be drilled and tapped to accept an M16 x 1.5 male NPT fitting. *If using for DOD Delete you must drill and tap all 8 oil port holes 1/8-NPT and install plugs in the oil ports or loss of oil pressure will occur.

Overview

Holley's new trussed LS valley covers are the latest addition to our expansive lineup of LS engine dress up products. Machined from billet aluminum and featuring a modern trussed design, these LS valley covers are the perfect upgrade for your LS engine if you are looking for a subtly custom touch. These valley covers are machined smooth on the underside, allowing for the elimination of Displacement-On-Demand (DOD), and instead feature an ample gasket sealing surface and provisions for re-installing the oil pressure sensor if necessary. Each valley cover is custom machined for either LS1/LS6 (10 bolt) or LS2/LS3/LS7/LSX (11 bolt) patterns and Holley / Mr. Gasket offers all the necessary gaskets and upgraded hardware options to complete your installation. The new Trussed LS valley covers are available in three unique finishes: natural billet (clear anodized for protection), polished billet, and black anodized billet.

Features:

  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • Smooth underside allows for elimination of Displacement-On-Demand (DOD)* and offers ample gasket sealing surface
  • All necessary gaskets and upgraded mounting hardware sold separately
  • Available in three unique finishes: natural billet (clear anodized for protection), polished billet, and black anodized billet

Specs

ApplicationLS2/LS3/LS7/LSX
Bolt Pattern11
BrandHolley
FinishBlack Anodized
Gaskets IncludedNo
Hardware IncludedNo
MaterialBillet Aluminum
Oil Fill Cap IncludedNo
Product TypeValley Covers
Part Number241-265

Service Parts


Tech Resources

If it is your intent to use the top mounted factory oil pressure sensor on LS2/LS3/LS7/LSX engines, you will need to carefully drill and tap the oil pressure sensor provision using the pre-located pilot hole on the bottom of the valley cover. The hole should be drilled and tapped to accept an M16 x 1.5 male NPT fitting. *If using for DOD Delete you must drill and tap all 8 oil port holes 1/8-NPT and install plugs in the oil ports or loss of oil pressure will occur.
We Suggest
    Reviews

      *Free Shipping & Handling only offered to the contiguous US on orders over $100.

      Some parts are not legal for use in California or other states with similar regulations.