MENU
241-266 - Holley LS Valley Cover - Finned - default Image
241-266 - Holley LS Valley Cover - Finned - additional Image
241-266 - Holley LS Valley Cover - Finned - additional Image

Holley LS Valley Cover - Finned

GM LS2/LS3/LS7/LSX Finned Valley Cover, Natural Cast

Application

PART# 241-266

Be the first to write a review
$122.95   Suggested Retail
$109.95   Your Price
Free Shipping
In Stock  
Qty: 
Add to Wish List

If it is your intent to use the top mounted factory oil pressure sensor on LS2/LS3/LS7/LSX engines, you will need to carefully drill and tap the oil pressure sensor provision using the pre-located pilot hole on the bottom of the valley cover. The hole should be drilled and tapped to accept an M16 x 1.5 male NPT fitting. *If using for DOD Delete you must drill and tap all 8 oil port holes 1/8-NPT and install plugs in the oil ports or loss of oil pressure will occur.

Overview

Holley's finned LS valley covers are manufactured from die-cast aluminum and feature a vintage finned design that perfectly complements our finned LS valve covers. These LS valley covers are the ideal upgrade if you are looking to dress up your LS valley pan. These valley covers are smooth on the underside, allowing for the elimination of Displacement-On-Demand (DOD), and instead feature an ample gasket sealing surface and provisions for re-installing the oil pressure sensor if necessary. Each valley cover is custom machined for either LS1/LS6 (10 bolt) or LS2/LS3/LS7/LSX (11 bolt) patterns and Holley / Mr. Gasket offers all the necessary gaskets and upgraded hardware options to complete your installation. The new finned LS valley covers are available in five unique finishes: natural cast, polished, satin black machined, factory orange machined, and gloss red machined.

Features:

  • Manufactured from die-cast aluminum with a vintage, finned design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • Smooth underside allows for elimination of Displacement-On-Demand (DOD)* and offers ample gasket sealing surface
  • All necessary gaskets and upgraded mounting hardware sold separately
  • Available in 5 unique finishes to best fit your engine bay

Specs

ApplicationLS2/LS3/LS7/LSX
BrandHolley
Emission Code4
FinishNatural
Gaskets IncludedNo
Hardware IncludedNo
LogoFinned, No Logo
MaterialCast Aluminum
Oil Fill Cap IncludedNo
Product TypeValley Covers
StyleFinned
WarrantyLimited 90 Day
Part Number241-266

Service Parts


Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Tech Resources

If it is your intent to use the top mounted factory oil pressure sensor on LS2/LS3/LS7/LSX engines, you will need to carefully drill and tap the oil pressure sensor provision using the pre-located pilot hole on the bottom of the valley cover. The hole should be drilled and tapped to accept an M16 x 1.5 male NPT fitting. *If using for DOD Delete you must drill and tap all 8 oil port holes 1/8-NPT and install plugs in the oil ports or loss of oil pressure will occur.

Warranty Information

Limited 90 Day: See Details

Applications

We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.