Application: 1970-1981 F-body with Rekudo JL8 spindles RK600-02, and Stock 1965-1982 C2/C3 Corvette replacement REKUDO JL8 Brake System - Fitment Notes: 1970-1981 Chevrolet Camaro and Pontiac Firebird - Vehicles must use the whole REKUDO JL8 front and rear brake system since the parts are unique (front spindles, rotors, front hubs, dust shields, rear calipers adapters, calipers, and brake hoses/hardlines). The REKUDO JL8 front brake system must use the front spindle set RK600-02 (since it has the caliper mounts and spindle pin for the front calipers and front hubs). The REKUDO JL8 rear brakes work with the factory GM 10-bolt 8.2", 10-bolt 8.5", or 12-bolt rear axles (with staggered rear shocks) and factory C3 Corvette rear drum-style parking brakes (inside the hat of the rear rotors). The REKUDO JL8 rear brake system also fits the 1967-1969 Camaro/Firebird (with the same rear axles shown above). Recommended Master Cylinder/Brake Booster - factory Power Brake Booster with master cylinder (1.125" bore size). 1965-1982 Corvette - Vehicles can use the REKUDO calipers and after-market brake hoses (brake hoses use banjo bolt attachment to the calipers). The rest of the brake system can retain stock factory parts. The REKUDO front hubs (fits 1969-1982 Corvette only) and rotors are the stock factory size and dimensions (so these also fit the Corvette). Slightly shorter bolts will be needed to attach the calipers on the Corvette (use two 7/16"-20 x 1.5" long Grade 8 bolts for each caliper). Minimum 15-inch diameter wheels are required for caliper clearance (low-profile wheel weights may be necessary for some 15-inch wheels). Use Front Spindles RK600-02 for Direct Mounting of The Front JL8 Calipers and Rear Caliper Adapters RK400-09 (for 1970-1981 Camaro/Firebird). Recommended Banjo Bolts: 977504ERL - 7/16"-20 Threads.