Sniper Sheet Metal Fabricated Intake Manifold Small Block Chevy

Part # 825071

1 Review

SBC Dual Quad Single Plane Carbureted Silver with Sniper Logo

In Stock

$849.95

Add to Wishlist

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.
See Emissions Details

Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!

Features:

3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes
(2) 4150 style Carburetor flanges
100% TIG welded
Carbureted Intake applications with laser etched Holley Sniper logo

Basic Operating RPM Range	1800-7000 RPM
Brand	Holley Sniper EFI
Carb Flange Center-to-Center	8.50"
Carburetor Flange	Square/4150
Category	Sniper Intake Manifolds SP
Color	Polished
Construction	Fabricated
EGR Port	No
Emission Code	4
Engine	Chevrolet Small Block Gen I
Finish	Silver
Front Height	6.771 inch IN
Front Maximum Height	6.771 IN
Fuel Injectors Included	No
Fuel Rail(s) Included	No
Gasket Or Seal Included	No
Intake Port Gasket(s) Included	No
Material	Aluminum
Nitrous Bung(s) Included	No
Plenum Finish	Polished
Port Size	1.90" x 1.15"
Product Type	Intake Manifold
Rear Height	6.771 inch IN
Rear Maximum Height	6.771 IN
Removable Runners	No
Removable Top/Lid	No
RPM Power Band	1800-7000 RPM RPM
Single Or Dual Plane Type	Single Plane
Style	Carbureted
Throttle Body Included	No
Vacuum Ports	None
Warranty	Manufacturer's Limited 90 Day Warranty
UPC	847875006610
Part Number	825071

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Instructions - 199r11777.pdf

Not Compatible with Large Cap HEI Distributors

Manufacturer's Limited 90 Day Warranty: See Details

Reviews

5 out of 5 stars

5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Your Review

Title

Review

Photos

Page:

Sbc fabricated tunnel ram

By Will P on February 22, 2020

I purchased the SBC intake with the Quick Fuel SL-450-VSTRR & VSTRF carbs. I used a felpro 1205 gasket with a thin line of silicone around all the ports. All together, set the floats and adjusted the idle mixture screws with a vacuum gauge. This thing is just as responsive as the dual plane intake and double pumper it replaces. It just pulls higher rpm as well. I originally bought it because I thought it would look cool on my 1934 coupe. It works great as well, I thought maybe the short runner length and large plenum would kill the low end but not at all. My engine is as follows: 383 SBC, 9.5 to 1 mildly ported 034 Bowties, Howard’s 180265-10 Hydraulic roller cam, 350TH trans with 3.73 rear gear and 3000lb car. Very happy with the purchase. I read reviews elsewhere that claimed it wouldn’t seal intake gaskets, etc.. maybe their heads were milled and they didn’t check the fitment before they just bolted it on. Works perfect for me.

Page:

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.

Sniper Sheet Metal Fabricated Intake Manifold Small Block Chevy

Sniper Sheet Metal Fabricated Intake Manifold Small Block Chevy

Emissions

Features:

Be the first to write a review

5 out of 5 stars

Your Review