Skip to main content

Holley Modular Lo-Ram EFI Manifold LS1/2/6

Lo-Ram Manifold Kit - LS1/2/6

Part # 300-620
1 Review

Holley Modular Lo-Ram EFI Manifold LS1/2/6

In Stock
Free Shipping - Lower 48 US States
MSRP $1,051.95
$840.95
Save $211.00
Add to Wishlist

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and the 105 mm throttle body part number 112-581 or similar models. The base intake manifold is designed with a low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration. The 300-620 plenum entry configuration is designed to allow the included Hi-Ram 105 mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.

Features:

  • Designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads
  • Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application.
  • Modular design allowing the use of the included plenum entry
  • Low height to aid the packaging of a plenum mounted air-to-water intercooler in a top-feed configuration or to fit under a stock or mildly modified hood in the front-feed configuration
  • High volume fuel rails and mounting hardware included with ¾”-16 o-ring ports (8 AN)

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Basic Operating RPM Range3500-8000 RPM
Brand Holley EFI
Burst Panel CompatibleYes
CategoryEngine
ColorSilver
ConstructionCast
EGR PortNo
Emission Code3
EngineGM LS1/LS2/LS6
FinishSilver
Flange StyleEFI
Front Height9.07" without Intercooler
Front Maximum Height9.07 IN
Fuel Injectors IncludedNo
Fuel Rail(s) IncludedYes
Fuel System TypeEFI
Gasket Or Seal IncludedYes
Grade TypePerformance
Injector QuantitySingle
Inlet LocationTop
Intake Port Gasket(s) IncludedNo
Manifold TypeLo-Ram
MaterialAluminum
Nitrous Bung(s) IncludedNo
Part TypeEngine Intake Manifold
Plenum FinishNatural
Product TypeIntake Manifold
Recommended UseForced Induction
Removable RunnersNo
RPM Power Band3500-8000 RPM
Single Or Dual Plane TypeSingle Plane
Sub CategoryCylinder Block Components
Throttle Body Bore Diameter105 MM
Throttle Body IncludedNo
WarrantyManufacturer's Limited 90 Day Warranty
UPC090127077542
Part Number300-620
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Lo-Ram Base Intake Manifold Plenum Top Mounting Flange Height - 5.17" Total Height: Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without an intercooler installed) Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/an intercooler installed - 9.07"+ the intercooler thickness
Manufacturer's Limited 90 Day Warranty: See Details
Reviews
1

5 out of 5 stars

  • 5 star

    100%

  • 4 star

    0%

  • 3 star

    0%

  • 2 star

    0%

  • 1 star

    0%

Your Review

Items 1 - 1 of 1
  per page
Page:
  1. 1
Items 1 - 1 of 1
  per page
Page:
  1. 1

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.