The new single plane EFI intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The manifold is designed to work with 4150 Style Throttle body EFI systems like the Holley 4150 style flange Universal Throttle Bodies. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1" shorter overall height than most single plane manifolds, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The fuel injector bores have back-cut exits in the runners for better fuel atomization. This design points the injectors at an angle to match the intake runner airflow angle. The black coated fuel rails and rail bracket assortment are included with the manifold for any easy installation with the injectors that you choose to use for your combination. Fuel rail designed for maximum throttle lever clearance.
(Injectors are not included)
The 300-260 intake manifolds are designed 4150 style Throttle Body EFI applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.
Also Available: 20-86 Throttle Cable Bracket, 20-87 Kickdown Cable Bracket
Features:
Single Plane Design with isolated Plenum
4150 Square Bore Mounting Flange
Power band: 2500-7500 RPM
Height: Front 4.18", Rear 5.28"
Port Size: 1.92” height 1.20" width
Lower Throttle Body Mounting height to help with hood clearance.
Holley laser etched logos on the black coated fuel rails and bracket assortment are included so that you can install the injectors of your choice.
Fuel injectors are not included
Fuel rail designed for maximum throttle lever clearance.
Specs
Brand
Holley EFI
Construction
Cast
Emission Code
3
Engine
Chevrolet Small Block Gen I
Finish
Satin
Front Height
4.18"
Fuel Inlet
9/16-18"
Fuel System Type
EFI
Manifold Type
High Rise
Product Type
EFI Manifolds
Rear Height
5.28"
RPM Power Band
2500-7500
Warranty
Limited 90 Day
Part Number
300-260
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
Modification to the valve covers may be required when this manifold is used with some types of cylinder heads.
The fuel rail inlet threads are 9/16-18 for a -6 port.