Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Earl's Oil Filter Relocation Kit - Mopar Gen III Hemi - Fits 3/4"-16 Filters

Complete Kit - Fits 2003-2007 Gen III Hemi Engine w/ 3/4"-16 Threads for Filter

Part # HEMI0004ERL

Earl's Oil Filter Relocation Kit - Mopar Gen III Hemi - Fits 3/4"-16 Filters

In Stock
Free Shipping - Lower 48 US States
$165.95
Add to Wishlist
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates & relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on instead of the oil filter and the two 3/8" NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. Aluminum construction with black anodized finish.

Features:

  • Relocate the Oil Filter on Gen III Hemi Engines – Ideal for Engine Swaps Where Extra Clearance is Needed
  • Choose From a Block-Off Plate or Complete Oil Filter Relocation Kit
  • Most 2003-2007 Engines Use 3/4"-16 Threads on the Filter (Use HEMI0002ERL or HEMI0004ERL)
  • Most 2008-up Engines Use M22 x 1.5 Threads on the Filter (Use HEMI0001ERL or HEMI0003ERL)
  • Oil Filter Relocation Kits (HEMI0003ERL & HEMI0004ERL) Include the Block-Off Adapter, Adapter Fittings, Push-On Hose, Hose Ends, and the Remote Filter Adapter (Everything Needed To Move the Filter)
  • The Gen III Hemi Block Has Two 3/8" NPT Ports Located Near the Filter for Plumbing to the Remote Filter (When the Factory Filter is Blocked Off)
  • Block-Off Adapter is Made from Aluminum w/ Black Anodized Finish – Attractive & Corrosion Resistant

About Earl's

Shop the official site of Earl's Performance Plumbing and discover our selection of end-to-end fittings, hoses, and automotive plumbing solutions at Holley.com!​

Brand Earl's
Center Stud Size3/4"-16
Diameter3 in.
Emission Code5
FinishAnodized Black
Height1.000"
Hose Length10 Feet
Hose Size10 AN
Inner O-Ring Diameter1.380"
Material6061 Aluminum
O-Ring Cross Section.139 Inches
Outer O-Ring Diameter2.693"
Outside Diameter3.000"
Product TypeOil Filter Relocation Kit
Wrench Size1-1/4
UPC090127101827
Part NumberHEMI0004ERL
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Most 2003-2007 Gen III Hemi Engines Use Oil Filters w/ 3/4"-16 Threads - use HEMI0002ERL or HEMI0004ERL. Most 2008-up Gen III Hemi Engines use Oil Filters w/ M22 x 1.5 Threads - Use HEMI0001ERL or HEMI0003ERL. A remote oil filter must be plumbed to the two 3/8" NPT ports on the cylinder block near the factory oil filter (the bottom port on the engine block is the inlet & the upper port is the outlet). The remote oil filter mount uses Fram PH-8 or HP-1 oil filter or equivalent.

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.