Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker Blackheart 3" 304 Stainless Steel Gen III Hemi Swap Exhaust System

1970-1974 Mopar E-Body Gen III Hemi Swap Exhaust System - 3" Dual 304 Stainless Steel with Quad Polished Tips (Fits Into Slots in Bottom of the R/T Style Rear Valance Panel)

Part # BH23116

Hooker Blackheart 3" 304 Stainless Steel Gen III Hemi Swap Exhaust System

In Stock
$1,293.95
Add to Wishlist
Starting at $114 a month with Learn More
8

Emissions

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle.

See Emissions Details
Finish off your Gen III HEMI Swap project with the finest exhaust system available for your 1970-1974 Mopar E-Body. Features 3" diameter, straight through 304 stainless steel, zero restriction mufflers, and 304 stainless steel mandrel bent exhaust tubing. Specifically designed for Gen III HEMI swap vehicles and a direct fit to BH2358 Long Tube Headers. Slip couplers allow the first 24" of the head pipes to be dropped in seconds, allowing the transmission to be easily removed for service. High tuck design for best possible ground clearance on lowered cars. Additional exhaust systems will be released for the E-body at a later date.

Features:

  • Direct Fit to BH2358 Hooker BlackHeart Headers
  • X-Pipe Design for a Deep Muscle Car Exhaust Note
  • Designed to Work with Popular Transmissions
  • Hanger System Works with Vehicles Originally Equipped with Single or Dual Exhaust
  • 3” Diameter Dual Exhaust System with Quad Polished Stainless Tips
  • The Quad Tip Exhaust Fits Below the two Notches at the Bottom of the R/T Rear Valance Panel
  • 304 Stainless Steel, Hand Welded Construction, High Quality & Corrosion Resistant
  • High Tuck Design to Maximize Ground Clearance
  • Limited Lifetime Warranty
  • Includes Attaching Hardware & Instructions

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

Application1970-1974 Mopar E-Body
Brand Hooker BlackHeart
Emission Code8
EngineChrysler Gen III Hemi
Exhaust SeriesHooker BlackHeart
Exhaust Tip ShapeRectangular Oval
Exit PositionQuad Out Rear
Inlet Diameter (in)3
LogoLaser Etched
Material304 Stainless Steel
Muffler Quantity2
Outlet Diameter (in)3
Product TypeExhaust System
Single DualDual
Sound LevelAggressive / Moderate
System TypeHeader-back
Swap
Tip FinishPolished
Tip StyleQuad
Tubing Diameter (in)3
UPC090127126448
Part NumberBH23116
8

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website
https://www.epa.gov/enforcement/epa-tampering-policy-epa-enforcement-policy-vehicle-and-engine-tampering-and-aftermarket

CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm

Use with BH2358 Header, BHS566 Engine Mounts, and BHS567 Transmission Crossmember and Adapter Plate for the Corresponding Transmission. The Quad Tips Fit the Slots in the bottom of the R/T Rear Valance Panel.

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.