Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker BlackHeart Gen V-LT Swap Long Tube Headers - Stainless

1963-1967 GM C10 2WD Trucks, Full Length Gen-V LT Swap 1-7/8", Collector Size 3" - Fits Trucks with Wide Frame Rails

Part # BH13240

Hooker BlackHeart Gen V-LT Swap Long Tube Headers - Stainless

Not Available

8

Emissions

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle.

See Emissions Details
These Hooker BlackHeart LT swap headers fit 1963-1967 GM C-10 2WD Trucks. The long-tube header design provides optimum engine performance with stainless steel construction for strength & corrosion resistance. These Headers are designed for use with BHS538 engine mounting brackets with wide frame rails. Easy installation since these headers are part of the Hooker BlackHeart swap system (all parts engineered to work together as a system for simple bolt-in Gen-V LT engine swap).

Features:

  • Gen-V LT swap headers for 1963-1967 GM C10 trucks with wide frame rails
  • Easy installation since these headers are part of the Hooker Blackheart Gen-V LT swap system – All parts are engineered to work together for simple bolt-in engine swap
  • Long tube header design with 1-7/8” primary tubes and 3.00” collectors for optimum engine performance
  • 304 stainless steel construction for strength & corrosion protection
  • Compatible with Holley Mid-Mount Accessory Drive System (BH13240) – for compact accessories and a great look under the hood of your C10
  • Compatible with modular engine mounting brackets BHS538 – allows future engine changes to GM Gen-V LT
  • Use with spark plug wires with angled boot, MSD 32823
  • Manufacturer’s Limited Lifetime Warranty

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

2WD/4WD2WD
Application1963-1967 C10
Brand Hooker BlackHeart
Choose Your PartHeaders
Collector Diameter3.00 inch
Emission Code8
Exhaust SeriesHooker BlackHeart
Header FinishNatural
Header StyleLong Tube
Material304 Stainless Steel
Primary Tube Dia.1-7/8 inch
Product TypeHeaders
Tube Material304 Stainless Steel
WarrantyLimited Lifetime Warranty
UPC090127106754
Part NumberBH13240
8

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website
https://www.epa.gov/enforcement/epa-tampering-policy-epa-enforcement-policy-vehicle-and-engine-tampering-and-aftermarket

CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm

Fits Vehicles with Wide Frame Rails - See photo for Identification of Frame Rail Style. Requires Use of Spark Plug Wires with Angled Boot - MSD 32823 or Accell 9070C (LS engines), or MSD 33823 (Gen-V LT engines). Use with the following Engine Mounts (Available Separately): Engine Mounting Brackets: BHS538 Clamshells: 71221019HKR (for Gen-V LT engines) - 2 Required Polyurethane Engine Mount Inserts: 71221016HKR (black), or 71221017HKR (red) - 2 Required Engine Mount Through Bolts: 71223015HKR - 1 Required
Limited Lifetime Warranty: See Details

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.