Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker Blackheart Standard LS Swap Mount Brackets - Dual Mounting Position

Fits GM 1988-1998 C1500 RWD Trucks

Part # BHS552

Hooker Blackheart Standard LS Swap Mount Brackets - Dual Mounting Position

In Stock
Free Shipping - Lower 48 US States
$129.95
Add to Wishlist
Hooker BlackHeart application-specific LS swap engine mounting brackets eliminate the installation guesswork and compatibility uncertainty that comes with using universal swap plate mounting methods. These mounting brackets are available with dual engine mounting positions that optimize powertrain placement based on user-selected transmission, transfer case and driveshaft compatibility/retention priorities. The factory transmission crossmember is re-used with these mounting brackets (cost savings since driveshafts and crossmember are re-used). Factory LS Vortec exhaust manifolds can be used along with the engine mounting brackets and are required to support a street-legal engine change (with catalytic converters). Mounts feature a black powder-coated finish and Include (2) engine mounting brackets, attaching hardware and instructions.

Features:

  • Standard Engine Mounting Brackets – for Two-Wheel Drive 1/2-Ton Trucks
  • Standard Engine Mount Brackets (BHS552,or BHS555) are Designed for Use with the Factory V8 Engine Isolators and Provide a Simple, Cost-effective LS Engine Mounting Solution
  • Fore/Aft Engine Mounting Engine Position Options – Optimizes Powertrain Placement Based on User-selected Transmission, Transfer Case and Driveshaft Compatibility/Retention Priorities
  • Forward-Bias Engine Location Provides Enhanced T56 Magnum Transmission Fitment and Engine Accessory Drive Compatibility in 2WD Applications
  • Rear-Bias Engine Location (Stock Bellhousing Plane Position) Allows an Existing Transmission Transfer Case and Related Driveshaft(s) to Remain Undisturbed, if Desired.
  • Standard Mounting Brackets are Engineered to Accommodate either Engine Location (Dual Mounting Positions)
  • Compatible with Factory Vortec Exhaust Manifolds for Use in 50-State Legal LS Engine Swap (with Appropriate Catalytic Converters)
  • Factory Driveshafts and Transmission Crossmember are Re-Used with Engine Swap
  • Fabricated 1/4" Steel Plate Construction - Provides a Strong, Durable Mounting Solution
  • Semi-Gloss Black Powder Coat - for a Durable Corrosion Resistant Finish
  • Allows Use of Electric Cooling Fan, or Factory Vortec Mechanical Cooling Fan
  • Compatible Oil Pans: Factory GM Truck LS Oil Pan, 302-2 or 302-3

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

Application1988-1998 Chevrolet / GMC C1500 Series Truck
Brand Hooker BlackHeart
ColorBlack
Emission Code6
Engine PositionDual
FinishBlack Powdercoated
MaterialSteel
Motor TypeGM LS
Product TypeEngine Mounts
Transmission4L60E
4L70E
6L80E
6L90E
700R4
T56 GM
T56 Magnum GM
TH400
Type of ComponentEngine Mount Bracket
UPC090127130278
Part NumberBHS552
These engine mounting brackets have been designed for use with the V8 engine mounts that were factory installed on these trucks. Use of these engine mounting brackets on 4.3L V6 equipped trucks will require the factory V6 frame side engine mounts and brackets to be removed and replaced with V8 engine mounts.

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.