This header is designed to be used with 12611HKR 1" set back engine mount plates only.
Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products.
Due to incompatibility with stock spark plug wire heat shields, aftermarket spark plug wires with 45° boots are recommended to be installed with these headers The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Hooker Headers new Titanium ceramic coating provides the exotic look of Titanium for a unique styling enhancement on any vehicle. Hooker's Titanium ceramic coating is formulated to withstand extreme temperatures of up to 1600° F all while maintaining its color and protecting your headers from corrosion. Hooker Titanium ceramic coating is perfect for a nostalgic or modern build.
NOTE: Not actual Titanium.
LS1 Full Length Engine Swap Header fits 67-69 Camaro/Firebird applications.
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler & Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Features:
Designed for optimal performance
Industry’s best welds for durability
All necessary hardware included for a complete installation
Works with all small block Chevy mounts and frame towers
5/16” machined flanges for a perfect seal
Long transition collector for decreased back pressure
Light weight & sturdy 18 gauge tubing
Mandrel-bent tubing for smooth exhaust flow
Tuned-length primary tubes for maximum exhaust scavenging and velocity
Perfect for use with GM''s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap headers
Specs
Brand
Hooker
Collector Diameter
3.00 inch
Emission Code
4
Header Finish
Titanium Ceramic
Header Style
Long Tube
Primary Tube Dia.
1-3/4 inch
Product Type
Headers
Tube Material
Mild Steel
Part Number
2288-4HKR
Emissions
This part is legal for sale or use on Racing Use Only Vehicles
The following vehicles are considered Racing Use Only Vehicles:
Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
This header is designed to be used with 12611HKR 1" set back engine mount plates only.
Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products.
Due to incompatibility with stock spark plug wire heat shields, aftermarket spark plug wires with 45° boots are recommended to be installed with these headers The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Applications
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.