Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker Mid Length Headers - Black Paint

1967-1969 Camaro, 1968-1972 Nova: 283-400, Tube 1-5/8" O.D. Mid-Length Header; Collector Size 2.5" O.D., Collector Length 10", Port Shape: Same As Port, Black Paint

Part # 2475HKR Be the first to write a review

Hooker Mid Length Headers - Black Paint

Not Available

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
If you are looking for maximum ground clearance for your First Gen Camaro, Hooker Headers announces the release of their new mid- length headers for the classic 1967-1969 F-Body (Camaro/Firebird) and 1968-1972 X-Body vehicles (Nova, Omega, Ventura, Apollo). These headers bring modern features and fitment to these classic platforms.

Features:

  • Designed for Pro Touring style or aggressively lowered vehicles where ground clearance is of utmost importance
  • Mid-length geometry designed for maximum ground clearance and optimized engine compartment fitment
  • Provide an elevated level of port finishing and fitment clearances compared to SB Chevy headers typically offered for this application
  • 3/8” laser cut flanges, TIG welded and flat finished for maximum strength and a leak free seal
  • 1-5/8" primary tube diameter is perfect for mildly modified engines
  • Long-taper collectors for smooth exhaust flow transition from the headers to the exhaust system
  • Compatible with straight and angle plug heads
  • Compatible with all stock manual and power steering boxes
  • Compatible with GM 152 and 168 tooth starters
  • Compatible with stock A/C evaporator case
  • Compatible with stock floor shift automatic transmissions; column shift automatics require the use of Lokar, or similar, aftermarket shift linkage. Not compatible with column shift manual transmissions or floor shift manual transmissions using factory mec
  • Compatible with aftermarket large sump oil pans
  • Bolt-in installation capability with new Hooker 2.5” and 3” exhaust systems for these applications, with available adapters (O2 bungs provided on adapter tubes)

About Hooker

Hooker Headers & exhaust systems are engineered to increase horsepower and torque while improving throttle response. Shop the official site of Hooker at Holley.com.

Bolt Size3/8-16 x 3/4
Brand Hooker
CARB (California) CompliantNo
Collector Diameter2.50 inch
Emission Code4
EngineChevrolet Small Block Gen I
Header FinishBlack Paint
Header StyleMid Length
Primary Tube Dia.1-5/8 inch
Product TypeHeaders
Special OffersClearance
Tube MaterialMild Steel
UPC090127688557
Part Number2475HKR
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Compatibility Notes: These headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. Note: Requires the use of 90 degree plug boots. Installation of these headers on GM Vortec cylinder heads requires minor dimpling to the #3 primary tube adjacent to the spark plug due to their modified plug location geometry.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.