Skip to main content
ASK OUR EXPERTS
1-866-464-6553

770 CFM Holley Off-Road Truck Avenger Carburetor

Manual Choke, Off-Road Vacuum Secondaries-4150

Part # 0-95770 Be the first to write a review

770 CFM Holley Off-Road Truck Avenger Carburetor

Not Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Holley's Truck Avenger series carburetors have just been taken to the next level. Truck Avenger carburetors are known to go off-roading right out of the box, so what could be better than a Holley Truck Avengerโ„ข carburetor? How about one in aluminum? They save weight and look great. The Aluminum Truck avenger features a chromate finish to protect against the grueling environments encountered by an off-road vehicle. The Aluminum Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment. The Aluminum Truck Avenger carburetors have the same great features as their zinc counterparts such as a quick change vacuum secondary for easy fine tuning; four vacuum ports for all necessary vacuum accessories; manual choke for precise cold start control; and a built-in fuel filter. The 770 CFM Off-Road Truck Avenger is the perfect carburetor for big block engines.

Features:

  • Aluminum Construction for added weight savings
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Optimized off-road calibration that works out-of-the-box
  • Manual choke (Cable driven, hand operated) for precise cold start control
  • Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • One piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40º while climbing and 30º during side hill maneuvers & “nose down” decents
  • Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

About Holley

Looking for Holley performance products? We're the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, and more. Buy now!

Barrels4
BoosterAnnular / Straight
Brand Holley
Carburetor UseOff-Road
CFM770
ChokeManual
ConditionNew
Emission Code3
FinishGold Dichromate
FuelGasoline
Fuel InletSingle
Marine UseNo
MaterialAluminum
Model4150
Primary Main Jet74
Primary Power Valve2.5
Primary Pump Nozzle Size35
Product TypeCarburetor
SecondariesVacuum
Secondary Main Jet99
Supercharged ApplicationNo
Throttle Bore1.688 inch
Vacuum Ports1 timed (spark) port, 2 full, and 1 PCV port
WarrantyLimited Lifetime Warranty
UPC090127719855
Part Number0-95770
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Notice - Due to the natural color variations of the dichromate plating process, the plating color may vary from casting to casting (within a carburetor) and from carburetor to carburetor. This is considered normal and is not a cosmetic defect. If you desire a carburetor with no color variation, please shop our black and shiny finish carburetors.
Limited Lifetime Warranty: See Details
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.