MENU

750 CFM Classic Holley Carburetor-Factory Refurbished

Manual Choke Vacuum Secondaries-4160

?
CFM
?
Choke

PART# FR-3310C

Be the first to write a review

Not Available Online

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Overview

This is an official Holley Performance Factory Refurbished Carburetor. Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a like-new carburetor! Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Factory Refurbished Carburetors have limited availability. A hot rod staple for over four decades! Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and manual choke make it amazingly universal. Plus, its classic Gold Dichromate finish provides serious muscle car looks and durability. The famed 0-3310 is one of the ten original inductees into the Hot Rod Magazine Speed Parts Hall of Fame! It was originally developed for the 1965 424hp 396 Chevelle and its well known performance calibration and 750 CFM airflow keep it on top still today. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.

Features:

  • Gold Dichromate finish for corrosion resistance and classic Holley looks
  • Performance upgrade for stock to mildly modified vehicles. Originally developed for the 1965 Chevelle 425hp 396 Chevelle and inducted into Hot Rod Magazine Speed Parts Hall of Fame!
  • Universal calibration for easy bolt-on performance
  • Manual choke (cable actuated - hand controlled) for precise cold start control
  • Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Power valve blow-out protection
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specs

Barrels4
Billet ColorNone
BoosterStraight
BrandHolley
CFM750
ChokeManual
Circuit2
Emission Code3
FinishGold Dichromate
FuelGasoline
Fuel InletDual
MaterialZinc
Model4160
Primary Main Jet72
Primary Power Valve6.5
Primary Pump Nozzle Size31
Product TypeFactory Refurbished Carburetor
SecondariesVacuum
Supercharged ApplicationNo
Throttle Bore1.688 inch
WarrantyLimited 90 Day
Part NumberFR-3310C

Service Parts


Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.