MENU

600 CFM Marine Carburetor- Factory Refurbished

Electric Choke Mechanical Secondaries-4150

?
CFM
?
Choke

PART# FR-80559

Be the first to write a review

Not Available Online

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Overview

This is an official Holley Performance Factory Refurbished Carburetor. Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a like-new carburetor! Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Factory Refurbished Carburetors have limited availability. All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters. The Holley 0-80559 Marine carburetor is designed with a universal calibration good for marine engines where a mechanical secondary 4150 model 4BBL with electric choke is required

Features:

  • Gold Dichromate finish for corrosion resistance and classic Holley looks
  • Performance Marine Calibration
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome performance
  • Dual accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • 4 corner idle allows you to precisely control your idle system
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specs

Barrels4
BoosterStraight
BrandHolley
CFM600
ChokeElectric
Emission Code3
FinishGold Dichromate
FuelGasoline
Fuel InletDual
Marine Engine SizeUniversal
MaterialZinc
Model4150
Primary Main Jet67
Primary Power Valve6.5
Primary Pump Nozzle Size28
Product TypeFactory Refurbished Carburetor
SecondariesMechanical
Secondary Main Jet74
Secondary Pump Nozzle Size32
Supercharged ApplicationNo
Throttle Bore1.563 inch
WarrantyLimited 90 Day
Part NumberFR-80559

Service Parts


Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.