Skip to main content
ASK OUR EXPERTS
1-866-464-6553

750 CFM Street HP Carburetor

Limited to Stock-Replaced by 0-82750SA

Part # 0-82750 Be the first to write a review

750 CFM Street HP Carburetor

Not Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
The Street HP™ uses the best features from Holley's race Bred 4150 HP™ carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used on the 650 and 750 cfm models so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor. Limited to stock. replaced by 0-82750SA

Features:

  • Vibratory polished for good looks
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturri inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Two corner idle for precise idle control
  • Quick change vacuum secondaries allows use on a wide range of vehicles
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

About Holley

Looking for Holley performance products? We're the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, and more. Buy now!

Barrels4
BoosterDown Leg
Brand Holley
Carburetor UsePerformance and Race
CFM750
ChokeNone
ConditionNew
Emission Code3
FinishShiny
FuelGasoline
Fuel InletDual
Marine UseNo
MaterialAluminum
Model4150
Primary Main Jet77
Primary Power Valve4.5
Primary Pump Nozzle Size31
Product TypeCarburetor
SecondariesVacuum
Secondary Main Jet84
Supercharged ApplicationNo
Throttle Bore1.688 inch
Venturii Size1.375 inch
WarrantyLimited 90 Day
UPC090127597149
Part Number0-82750
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Limited 90 Day: See Details
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.