While modifying a street carburetor for circle track applications can work reasonably well, Quick Fuel Technology's Q-Series circle track carbs eliminates the guesswork and offer substantial advantages in adjustability, consistency, and predictability. Since racing around a banked oval pushes fuel to the passenger side of the car, Q-Series circle track carburetors feature die-cast aluminum fuel bowls with internal baffles that eliminate slosh. The bowls also feature an integrated fuel chute that substantially reduces aeration, and directs fuel toward the main jet pickup area. To assist in flattening out the fuel curve, screw-in air bleeds enable fine-tuning of both the low- and high-speed systems, while a proprietary booster design enhances carb signal without restricting high-rpm airflow. Helping drivers put the power down is an adjustable QuickLink system that allows changing the opening rate of the secondaries to 40-, 60-, or 100 percent. Circle track Q-Series carbs are available in 6 different sizes ranging from 650-1,050 cfm for both gasoline and alcohol applications. All Q-Series circle track carburetors are equipped with roller bearing seals which provide smoother throttle response, less wear on shaft, and longer life.
•Lightweight aluminum main body
•Vacuum and mechanical secondary models available
•Aluminum fuel bowls with dual sight glass windows
•Billet metering blocks with 4-corner idle system
•Changeable idle feed and power valve channel restrictions
•Billet aluminum throttle body provides exceptional precision and strength
•Teflon® coated and sealed shafts that have been slabbed for added air flow
High Speed Air Bleed
Idle Air Bleed Size
Primary Main Jet
Primary Power Valve
Primary Pump Nozzle Size
Secondary Main Jet
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.
*Free Shipping & Handling only offered to the contiguous US on orders over $100.
Some parts are not legal for use in California or other states with similar regulations.
Use our simple CFM calculator to learn what CFM you need:
Your ideal CFM range is XXX.
You should stay as close as you can to this CFM and should go no more than 50 CFM in either direction.
In order to get a proper estimate, we need a little more information from you.
Please contact Tech Service at
If you have any other questions, contact Tech Service at