650 CFM Track Warrior Carburetor
Limited to Stock
PART# 0-67199PL
Be the first to write a review
$658.00
Suggested Retail
$591.95 Your Price
$591.95 Your Price
Free Shipping
In Stock
Qty:
Add to Wish List
Starting at $53 a month with
Learn More
Overview
Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP™ carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!!
Limited to Stock. Replaced by 0-67199BK.
Features:
- Aluminum construction for weight savings and long lasting good looks in purple or black
- Optimized race calibrations for outstanding throttle response
- Contoured venturi inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- The billet metering blocks feature improved durability over cast blocks, true gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors)
- Available in 650, 750, and 850 CFM versions
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Specs
| Barrels | 4 |
|---|---|
| Billet Color | Purple |
| Booster | Down Leg |
| Brand | Holley |
| Carburetor Use | Performance and Race |
| CFM | 650 |
| Choke | None |
| Condition | New |
| Emission Code | 3 |
| Finish | Shiny |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| Marine Use | No |
| Material | Aluminum |
| Model | 4150 |
| Primary Main Jet | 73 |
| Primary Power Valve | 6.5 |
| Primary Pump Nozzle Size | 31 |
| Product Type | 4150 Model Carburetor |
| Secondaries | Mechanical |
| Secondary Main Jet | 80 |
| Secondary Pump Nozzle Size | 31 |
| Supercharged Application | No |
| Throttle Bore | 1.688 inch |
| Venturii Size | 1.250 inch |
| Warranty | Limited 90 Day |
| Part Number | 0-67199PL |
Service Parts
![Fuel Bowl Gasket]()
For Model 2300™, Model 4150™, Model 4160™ and Model 4500™ Two Circuit Carburetors$11.48Qty:![Single-Stage Power Valve]()
![GM AOD Kickdown Cable Bracket]()
Kickdown Cable Bracket For Use Only On Models 4150 & 4160 carburetors with 700R-4 transmissions.$27.65Qty:![Jet Assortment Kit]()
![700R-4 KICKDOWN THROTTLE Bracket]()
![Metering Block Gasket]()
For Models 2300™, Model 4150™ Model 4160™ and Model 4500™ without Intermediate Circuit$11.48Qty:![Fuel Line]()
Fuel Line Chrome For Holley Model 4150 Carburetor 5/8-18 inverted flare inlet. 9.313" center to center.$40.91Qty:![Ford Trans. Hardware Kit]()
![Carburetor Standard Main Jet]()
![Carburetor Throttle Cable Bracket]()
![Carburetor Standard Main Jet]()
![Accelerator Pump Cam]()
![Inlet Needle - Viton]()
Inlet Needle Viton® Tip Adjustable 0.120" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)$30.06Qty:![Trick Kit Carburetor Rebuild Kit]()
Trick Kit Carburetor Rebuild Kit Holley Vac. Sec. & Double Pump$138.95Qty:![Tuning/Calibration Kit]()
![Universal Carb Installation Kit]()
Carburetor installation kit for square and spread bore carburetors$22.97Qty:![Accelerator Pump Tuning Kit]()
Accelerator Pump Tuning Kit For Holley 2 BBL And 4 BBL Performance Carburetor$165.95Qty:![Renew Kit Carburetor Rebuild Kit]()
Renew Kit Carburetor Rebuild Kit Model Number 4150 and 4500$132.95Qty:![Replacement Fuel Bowl Kit]()
Replacement Fuel Bowl Kit - Hung Float Style - For Dominator and 4150 Carb - w/ Dual Inlets$56.58Qty:![Ford Trans. Hardware Kit]()
Trans Kickdown Spring & Bracket w/1 Mounting Hole And Locator Pin$11.31Qty:![Carburetor Adapter Plate]()
![Air Bleed Assortment Kit]()
Assortment Kit For Holley Model 4150 HP™ & 4500 Dominator® Carburetors$258.95Qty:![Carburetor Throttle Secondary Adjusting Lever Kit]()
Secondary Throttle Adjusting Lever Kit$50.55Qty:![Replacement Fuel Bowl Kit]()
Replacement Fuel Bowl Kit - Secondary Bowl - Center Hung Float Style - Dominator and 4150 - w/ Dual Fuel Inlet$65.01Qty:![Black Anodized Adjustable Billet Fuel Line]()
Black anodized adjustable billet fuel line for dual feed Model 4150 and Dominator Carburetors. Adjustable to allow for fitment on various metering block and fuel bowl configurations.$280.95Qty:
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
