Skip to main content
ASK OUR EXPERTS
1-866-464-6553

iNTECH Cold Air Intake

2018-2023 Jeep Wrangler JL 3.6L V6 and 2020-2023 Jeep Gladiator JT 3.6L V6. CARB Compliant under EO# D-115-29 for 2018-2020 Wrangler and 2020 Gladiator.

Part # 223-16 Be the first to write a review

iNTECH Cold Air Intake

Not Available

7

Emissions

This part is legal under the provisions of EPAโ€™s Tampering Policy dated November 23rd, 2020.

See Emissions Details
Holley's iNTECH cold air intake brand represents the highest degree of technology, performance and style for late model cars, trucks and SUV's. This system is designed for the popular 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT V6, 3.6L and produced +25 HP and +23 lb.ft. torque on the dyno with a very broad power curve. All iNTECH sealed intakes feature a unique patented Slip-Seal housing-filter-tube interface that eliminates the use of hose clamps and adapters for a seamless installation. The high flow, washable and reusable 4-layer dry air filter eliminates the use of filter oils that may damage MAF sensors and set off check engine lights. The use of factory mounting locations makes for a simple installation and the housing design is styled to match the engine compartment of your vehicle for a stealthy appearance. We mounted the conical filter in a vertical position to aid in shedding the dust, dirt or mud that may be encountered on any off-road adventure.

Features:

  • Produced +25 horsepower and +23 lbs. ft. of torque with excellent performance across all RPM levels
  • Unique patented Slip-Seal housing-filter-tube interface eliminates the use of hose clamps and adapters for a seamless installation
  • One-Piece fully sealed intake housing design guarantees a true fresh air intake charge
  • Utilizes factory mounting locations for a simple and secure installation
  • Vertical filter position aids in shedding dust during off-road driving conditions to allow for less cleaning
  • High-flow, washable and reusable 4-layer dry performance air filter for maximum air flow and filtration
  • Air filter media is constructed with an inner and outer aluminum mesh preventing filter deformation and rust
  • High-quality silicone bellows style coupler is used at the throttle body connection to accommodate use of nitrous plates or throttle body spacers without the need for cutting the tube
  • Patented design is styled to enhance the look of your engine compartment for a stealthy appearance
  • One-piece intake tube designed for maximum air flow and efficiency
  • Stainless steel hose clamps for maximum clamping force and durability
Air Box IncludedYes
Brand Holley iNTECH
CARB (California) CompliantYes
CARB EO#D-115-29
Emission Code7
Fuel TypeGas
Product TypeCold Air Intake
UPC090127053676
California Proposition 65 Chemical NameBrass
California Proposition 65 RequiredYes
Part Number223-16
7

This part is legal under the provisions of EPAโ€™s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
CARB Compliant under EO# D-115-29 for 2018-2020 Wrangler and 2020 Gladiator.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.