MENU
558-106.jpg
largesensors.jpg

Gen III Hemi Main Harness - Early Crank & Cam Sensors

Limited To Stock On Hand - Gen III HEMI Main Harness, For Early Crank & Cam Sensors, for Dominator EFI - Requires DBW Throttle Body Harness. This harness DOES NOT have IAC / TPS connectors.

PART# 558-106

Be the first to write a review
$535.95   Suggested Retail
$107.31   Your Price
In Stock  
Qty: 
Add to Wish List

This part is limited to stock on hand. This means once current inventory is sold out, it will not be back ordered nor will it be built again. In the rare case where a product is oversold, your order may be partially filled or canceled and payment will be refunded. Requires the HEMI injector harness, drive-by-wire harness and coil adapter harness. The HEMI's Variable Valve Timing is not supported by the Holley EFI systems at this time. You can run an engine that is equipped with VVT, but the cam timing will revert to the mechanical default. The Holley R&D team is working on an accessory harness that will drive the VVT actuator. However, it is not available at this time. The HEMI's Multi-Displacement System (MDS) was primarily designed for fuel economy purposes and does not need to be connected when switching to a Holley EFI system. NOTE: Not legal for sale or use on pollution controlled vehicles.

Overview

This is the main EFI Harness that connects to all of the necessary factory sensors and related EFI sensors to run a Holley EFI system. There is an Early Gen III as well as a Late Gen III harness. The main difference between the early and late harnesses is within the connector for the crank and cam sensors. These changes were implemented across the truck and passenger car lines around 2007. There is not a firm change-over date. View the image gallery to determine the type of crank and cam sensors you have.

Features:

  • Take control of your Gen III HEMI with Holley EFI by controlling fuel and spark. Great for power upgrades and engine swaps.
  • Capable of tuning with power adders such as nitrous, superchargers or turbos and compatible with methanol and water injection
  • Harnesses are available to connect to a Gen III HEMI engine for the most advanced fuel and timing controls available
  • Each Harness is designed in fit and function specifically for the Gen III HEMI engine platform
  • All wiring is TXL grade copper wiring with minimal weight, high temp sleeve in a small diameter
  • Factory style terminations provide a strong, secure connection
  • Connectors are OEM grade for a correct, positive fit
  • Each harness is routed through a split-loom braid for protection and great looks

Specs

BrandHolley EFI
Emission Code3
Harness ApplicationHEMI
Harness TypeMain
Product TypeHemi Main Engine Harness
Part Number558-106

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

Holley EFI Dealers
Do you need a custom kit built for your application? Do you need a system installed and tuned? Click here to find the Holley EFI dealer in your area!
Wiring Shop Quick Reference Guide
Wiring Shop Quick Reference Guide
This part is limited to stock on hand. This means once current inventory is sold out, it will not be back ordered nor will it be built again. In the rare case where a product is oversold, your order may be partially filled or canceled and payment will be refunded. Requires the HEMI injector harness, drive-by-wire harness and coil adapter harness. The HEMI's Variable Valve Timing is not supported by the Holley EFI systems at this time. You can run an engine that is equipped with VVT, but the cam timing will revert to the mechanical default. The Holley R&D team is working on an accessory harness that will drive the VVT actuator. However, it is not available at this time. The HEMI's Multi-Displacement System (MDS) was primarily designed for fuel economy purposes and does not need to be connected when switching to a Holley EFI system. NOTE: Not legal for sale or use on pollution controlled vehicles.
We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.