Skip to main content
Overstock Sale - Savings up to 40% off!
Motor Life Events Community Support
Videos
Holley EFI

Holley Terminator X Fuel Injectors - Set of Eight

PICO/EV6 - 100 lb/hr - High Impedance

Part # 522-108X Be the first to write a review

Holley Terminator X Fuel Injectors - Set of Eight

Estimated Ship Date: 04/30/2025
Find Similar In-Stock Items
Free Shipping - Lower 48 US States
$421.95
Add to Wishlist
Notify Me When Available

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details

Also Bought

Terminator X High Impedance Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp o-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Features:

  • PICO/EV6 style performance injectors – sold individually or set of 8
  • High impedance for use with saturated drivers
  • Rated injector flow: 100 lb./hr. at 60 PSI of base fuel pressure
  • USCAR injector connector
  • 40mm o-ring to o-ring length

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Body Diameter0.65
Body Length1.85"
Body StyleEV6
Brand Holley EFI
CategoryAir and Fuel Delivery
ColorBlack
Connector SeriesEV6
Connector ShapeEV6
Emission Code4
Flow Rate100 4U
Fuel Injection TypePort
Fuel TypeE-85, Gasoline
Gasket Or Seal IncludedYes
Grade TypePerformance
ImpedanceHigh (12.2 Ohm)
Mounting Hardware IncludedNo
O-Ring Quantity2 per injector
O-Ring to O-Ring1.421
Part TypeFuel Injector
Product TypeFuel Injector
Rated Injector Flow100 lb/hr
Retainer Clips IncludedNo
Sub CategoryFuel Injection System and Related Components
Terminal GenderFemale
UPC090127127278
Part Number522-108X
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Instructions - techlibrary_terminatorxv2injectordata.pdf
Designed for use in setups with a 38mm distance between the o-ring seats on the fuel rail and intake manifold (commonly referred to as an "LS3-Style" injector), this injector features a USCAR connector and 14mm o-rings on both ends. It is an ideal fit for Holley EFI Intake manifolds that include fuel rail brackets for shorter LS3/LS7 length injectors. However, when used in an intake manifold designed for factory LS3/LS7 injectors, the bottom o-ring needs to be replaced to ensure proper fitment.

We Suggest

Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.