Skip to main content
Spring Cleaning Sale - Big Savings!
Motor Life Events Community Support
ASK OUR EXPERTS
1-866-464-6553
Videos
APR

APR 980cc MPI Injector Kit

APR 980cc MPI Injector Upgrade Kit with high-flow multiport injection (MPI) injector.

Part # MS100195

APR 980cc MPI Injector Kit

In Stock
Free Shipping - Lower 48 US States
$102.95
Add to Wishlist
Does it fit my vehicle?
4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details

Also Bought

High horsepower configurations often require more fuel, especially on applications where ethanol is used. The APR 980cc MPI Injector Upgrade Kit includes an upgraded high-flow multiport injection (MPI) injector and harness necessary to satisfy high horsepower builds. The kit uses a compact and extended tip Bosch EV 14 injector that supports Ethanol and Methanol and flows 980cc/min at 3 bar. A high quality 2 wire harness with braided wire sheathing converts the Bosch Jetronic connector to the necessary factory style connector making this upgrade plug-and-play with an associated ECU upgrade.

Features:

  • Bosch EV 14 CKxT MPI injector (0 280 158 040)
  • APR Bosch Jetronic to OEM 2 pin harness
  • 980cc/min, 670g/min, or 89lb/hr @ 3 bar (n-heptane)
  • Supports up to 8 bar of use in motorsport configurations
  • E85 and M100 compatible
  • 30° single cone spray angle with 0° bent angle and 0° gamma angle
  • 33.6mm compact body
  • 24mm extended tip nozzle
  • Top-feed injector
  • 12 ohm coil resistance
  • 150 mm long harness with braided wire sheathing
  • ECU software required for use
  • Plug-and-play on 2.5 EA855 EVO & 2.0T EA888 Gen 3, where supported

About APR

APR's sole mission is to engineer only the highest quality tuning solutions for Volkswagen, Audi, and Porsche vehicles to give you the ultimate driving experience while consistently providing the enthusiast the ultimate in customer care and support.

Body LengthN/A
Body StyleEV14
Brand APR
ConnectorBosch Jetronic to OEM
Connector SeriesEV6
Direct FitYes
Emission Code4
7
ImpedanceHigh
Max Pressure (Bar)8
MPI Injector CC980cc/min @ 3 bar
MPI Injector Count1
O-Ring to O-RingN/A
Product TypeMPI Injector Upgrade Kit
Rated Injector Flow89 lb/hr
UPC810009932765
Part NumberMS100195
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

On the 2.5 TFSI EA855 EVO the injector is plug-and-play with software. On the EA888 Gen 3, the injector is plug-and-play, with software, on models that include factory MPI injection. On models without factory MPI injection, more components are required. If used for methanol injection, the valves must be flushed with standard gasoline after use.

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.