Skip to main content
ASK OUR EXPERTS
1-866-464-6553
Holley Sniper EFI

Sniper EFI Fuel Tank System 400 LPH

1963-1967 Corvette, Coated Steel, EFI, Gas

Part # 19-447 Be the first to write a review

Sniper EFI Fuel Tank System 400 LPH

In Stock
Free Shipping - Lower 48 US States
$869.95
Add to Wishlist
Starting at $77 a month with Learn More
3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling and a fuel level sending unit. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! ***Steel filler neck is not included. You must use your existing stock filler neck or purchase one through restoration suppliers. ***This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size is: 38" x 15-3/4" x 11-3/4"

Features:

  • Tanks are coated galvanized steel then powder coated silver for total corrosion protection
  • 400 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
  • Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
  • Fuel level sender included with the correct Ohm range for your factory gauges
  • Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car
  • EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation
  • Fits and looks like an OE tank when installed
  • Complete bolt in solution for your EFI conversion
  • Includes new tank straps
Application1963-67 Chevrolet Corvette
Brand Holley Sniper EFI
ColorSilver
Drain PlugNo
Emission Code3
4
FinishPowdercoated
Free Flow LPH400
Fuel System TypeGasoline
Gallon Capacity18
MaterialSteel
New Straps IncludedYes
Product TypeFuel Tank
WarrantyLimited 90 Day
UPC090127051702
Part Number19-447
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
  • Fuel Tank
  • Sending Unit
  • Fuel Pump Module
  • Fuel Tank Straps
  • Detailed Installation Instructions
When installing sending units, please remember to rotate the unit until the mounting holes align with the flange holes in the tank. This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. The sending unit using a three wire connection. A wiring schematic is shown in the product images. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. When testing the ohm range of the sending unit with a stock Corvette gauge you should have the following results: Sender & Power (white & red wires)= 0-120 OHMS Sender & Ground (white & black wires)= 120-0 OHMS Power & Ground (red & black)= 120 Constant
Limited 90 Day: See Details
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.