Free shipping on orders over $100 Details

Holley Fuel Cell EFI Pump Module Assembly 6 Bolt Flange with VR Series Brushless Fuel Pumps

Street/Strip Carb or EFI Applications 2150 EFI or 2400 Carb HP Compatible with Pump Gas, Race Gas, Methanol and E85*

Flange Style
Fuel Type
  • E85
  • Gasoline
  • Methanol
Free Flow LPH

PART# 12-142

Be the first to write a review
$1,150.00   Suggested Retail
$1,034.95   Your Price
Free Shipping
In Stock  
Add to Wish List

Starting at $91 a month with Learn More


Holley Fuel Cell EFI Pump Modules with a VR Series Brushless Fuel Pump. These drop in modules come with one controller and harness to give you VR fuel pump power inside your fuel cell. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 11" deep. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line. ***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells. Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85* (Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event) and can maintain pressures of 130 PSI and up to 170 GPH flow**. Fueled by TI Automotive. The pumps include a 2 step controller for pump speed control. The pumps can be ran in one of two different speeds. A low speed control for low fuel consumption requirements or at full speed for high fuel consumption requirements. The VR1 includes one controller for precise control of the pump. Both the VR1 and VR2 pumps are proven for 18.5V compatibility. **At 13.8V * Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall


  • Capable of 130 PSI while providing significant flow for forced induction applications where belt driven pumps are normally used.
  • Unlike other pumps, the VR Series are built for continuous duty if needed.
  • Billet aluminum construction for durability and good looks
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • High flow and high pressure with low amperage draw
  • Can be fully submerged in the fuel cell or chassis mounted
  • Maximum amp draw of 38 AMPS for the VR1
  • Modules include a single VR Series Brushless fuel pump with two step controllers and harnesses.


Emission Code5
Flange Style6 Bolt
Free Flow GPH170 @ 13.8 Volts
Free Flow LPH644
Fuel SystemCarbureted
Fuel TypeE85
Inlet Size8 AN O-Ring
Outlet Size10 AN O-ring
Product TypeFuel Pump
Pump Body ColorBlack
Single or Dual PumpSingle
WarrantyLimited 90 Day
Part Number12-142

Service Parts



This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

Tech Resources

Fill cap thread is 1 1/2"-12

Warranty Information

Limited 90 Day: See Details
We Suggest
    Also Bought

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.

         X  Sloppy Mechanics Sweepstakes
         X  Sloppy Mechanics Sweepstakes