MENU
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - default Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image
19-365 - Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System - additional Image

Sniper Diecast 340 LPH In-Tank Carbureted RetroFit Fuel Module Returnless System

340 LPH Drop-In Retrofit Carbureted Fuel System-E85 Compatible Supports up to 900 Carb HP (HP Rating @ 6 PSI at 13.5 Volts / 10.4 AMP Draw)

PART# 19-365

Be the first to write a review
$277.95   Suggested Retail
$249.95   Your Price
Estimated shipping date: 08/23/2019
Email Me When Available
Free Shipping
Qty: 
Add to Wish List

It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.

Overview

External electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Sniper has designed their latest retrofit pump module especially for the carbureted applications. The module design is very similar to the existing EFI pump modules using a 340 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Once installed, hook up your fuel lines and your power source/ground and you're off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 900 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...

Features:

  • The easiest way to convert your vehicle to an in-tank fuel system
  • Installs in any fuel tank from 7” to 12” deep to fit a wide variety of applications
  • The low profile design is only 1.275" thick above the tank mounting surface for added clearance when needed
  • The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
  • The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
  • Die cast aluminum construction for corrosion resistance and long lasting good looks
  • ¼” NPT ports for a wide variety of plumbing options
  • 340LPH pump that is E85 compatible for returnless style systems

Specs

ApplicationUniversal
BrandHolley Sniper
Diameter4.8"
Emission Code5
Free Flow LPH340
Fuel System TypeGasoline/E85 Compatible
Fuel TypeE85
Gasoline
MaterialDie Cast Aluminum
NPT Thread1/4 NPT
Product TypeFuel Pump
WarrantyLimited 90 Day
Part Number19-365

Service Parts


Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

Tech Resources

It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.