Filter Regulator ASY - 8AN , 175 GPH, 10 Micron
All aluminum housing is both clear and black anodized for corrosion protection.
Internal Regulator is preset at 59.5 psi
#12-875 has 3/8 NPT ports. #12-876 has -8AN ports.
When converting your fuel system to a return style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley continues to be the leader in fuel system development to make your life easier! The new Holley EFI Filter Regulator assembly simplifies your installation by combining the fuel filter and regulator in one assembly that can be mounted in the rear of the vehicle. Thus making your return line much shorter.
The aluminum assembly contains a 175 GPH 10 Micron filter and a regulator preset at 59.5 psi. The filter regulator comes in 3/8" NPT or 8 AN port sizes to match most EFI fuel systems.
Add billet mounting clamps; 162-574 and 162-574S
Features:
Designed to help minimize the fuel line plumbing needed when installing an electronic fuel injection conversion
Specs
Brand
Holley EFI
Emission Code
3
Fuel System
EFI
GPH
175
Micron
10
Product Type
Regulator
Part Number
12-876
Emissions
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.