MENU
300-141.jpg
300-141_300-143_03.jpg
300-141_300-143_04.jpg
dimensions1rev.jpg
Holley EFI LT1 Hi-Ram IntakesYouTube Button

Holley Hi-Ram Intake Manifold - GM LT1

GM Gen V LT1 Hi-Ram, 1 x 105mm LS Throttle Body (Longitudinal Mount) w/Port EFI Provisions & Fuel Rails

PART# 300-140

$888.95   Suggested Retail
$799.95   Your Price
Estimated shipping date: 06/07/2017
Free Shipping
Qty: 
The versions of the LT1 Hi-Ram intake manifold with port EFI provisions and fuel rails are designed to accept Bosch Style EV-1 or GM LS7 fuel injectors

Overview

The new Holley EFI Hi-Ram intake provides the ultimate performance with the new GM direct injected Gen V 6.2L LT1 engine. The modular design of this manifold allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper & cross-sectional area to perform in a wide variety of engine configurations. The optional injector bosses on the intake runners allow increased performance potential by using additional injectors along with the factory direct injection. When you look for the pinnacle of performance, price, and quality, look to Holley EFI.

Features:

  • Modular Design w/ Removable Top
  • Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
  • A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
  • Height at Plenum Flange: 9.44”
  • Port Size: 2.06” High x 1.53” Wide
  • Runner Length: Approx. 6.5”
  • Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
  • Available With or Without Injector Ports in the Runners
  • Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
  • Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
  • Rear of Plenum Machined for MAP & 3 Vacuum Ports
  • Head Flange has Clearance for Fuel Supply to High Pressure Pump
  • Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
  • O-Ring Seals at Cylinder Heads & Plenum Top
  • Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
  • Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
  • 3500-8000+ RPM Power Band

Specs

BrandHolley EFI
ConstructionCast
Emission Code3
EngineGM Gen V LT1
FinishSatin
Manifold TypeHi-Ram
RPM Power Band3500-8000+

Tech Resources

The versions of the LT1 Hi-Ram intake manifold with port EFI provisions and fuel rails are designed to accept Bosch Style EV-1 or GM LS7 fuel injectors

Parts & Kits

Emissions

This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.

*Free Shipping & Handling only offered to the continental US on orders over $100.

Some parts are not legal for use in California or other states with similar regulations.