Earls Straight Transmission Oil Cooler Adapter -6 Male to 9/16-18 Threads - Short (Front)
Earls Transmission Oil Cooler Adapters, One Adapter w/ Crush Washer Fits 4L80E (Some 2009 & Later) w/ 9/16-18 threads - Short (Front), Nickel Plated Steel
PART# 961982ERL
Overview
There are always clearance challenges when doing an engine
swap. One of these is routing the transmission cooler lines
off the side of the transmission while cleaning the trans tunnel.
Earl’s makes this easier with their line adapters.
Integrating into the GM transmission and adapting to AN
lines allows additional clearance and freedom that the original
hard lines cannot. Adapters are available for the popular GM Transmissions
4L80E (Fits Transmissions w/ 9/16-18 Threads Short/Front). Order Two adapters (one short for the front and one long for the rear to match the threads on your transmission). The thread size varies depending on the application.
Features:
- Nickel Plated Steel Construction
- High Pressure Capabilities
- Available for Any Plumbing Situation And Many Custom Applications.
Specs
| Adapter AN Size ( A ) | 6 AN MALE |
|---|---|
| Adapter NPT Size ( B ) | 9/16-18 MALE |
| Adapter Type | Transmission Cooler |
| Brand | Earls |
| Finish | Nickel |
| Material | Steel |
| Product Type | Transmission Cooler |
Parts & Kits
Steel Construction. Typical Application Power Steering/Fuel Pump - 3/8" Tube Inverted Flare.$10.60Qty:
Steel Construction. Typical Application Power Steering/Fuel Pump - 5/16" Tube Inverted Flare.$10.60Qty:
Steel Construction. Typical Application Power Steering - Inverted Flare.$10.60Qty:
Earls Transmission Oil Cooler Adapters, One Adapter w/ O-ring Seal Fits 4L80E (Some 2009 & Later) w/ 9/16-18 threads - Long (Rear), Nickel Plated Steel$9.96Qty:
*Free Shipping & Handling only offered to the continental US on orders over $100.
Some parts are not legal for use in California or other states with similar regulations.